Cooper Lighting ADY080864 用户手册
Canopy
Appropriate fasteners
(by others)
(x2)
(by others)
(x2)
Mounting plate
1. To mount non-power side pendant, use dimensions provided
on page three(3).
2. Using appropriate fasteners(by others), secure mounting plate
to structure/ bracing in ceiling.
on page three(3).
2. Using appropriate fasteners(by others), secure mounting plate
to structure/ bracing in ceiling.
End cap
#8-32 x.75"
Cap screw
(x2)
Cap screw
(x2)
1/4-20 x1"
Aiming screw
Aiming screw
3/8-16 x1"
Hex end screw
(x2)
Hex end screw
(x2)
Fixture door
Mounting bracket
Canopy
Exploded View and Part Call-Out
J-box
(by others)
(by others)
Securing Power side Pendant to Ceiling
Attention:
All extra large fixtures require additional bracing/structure around J-box to support fixture.
Securing non-Power side Pendant
Pendant length dependant
on order(multiple sections
may be required, consult
factory for coupler and
safety wire installation
requirements).
on order(multiple sections
may be required, consult
factory for coupler and
safety wire installation
requirements).
Appropriate fasteners
(by others)
(x2)
(by others)
(x2)
Canopy
J-box
(by others)
(by others)
Mounting plate
1. Remove canopy and allow it slide down pendant.
2. Using appropriate fasteners(by others), secure mounting
plate to structure/ bracing around J-box.
3. For mounting plate dimensions refer to page three(3).
2. Using appropriate fasteners(by others), secure mounting
plate to structure/ bracing around J-box.
3. For mounting plate dimensions refer to page three(3).
Warning
: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Installation Instructions
1.
Sheet 1 of 3
Roundel, XL
INDOOR
PS
(Pendant Swivel)
Visor and Non-Visor
2.
ADY080864 REV B(ECN080377)