Sanus Systems VMCT 产品宣传页
Assembly Instructions for Model: VMCT
Thank you for choosing a Sanus Systems VMCT. This product is designed to work with other products to easily and safetly
contain and hide component cables, power cords, and wires.
If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified
contractor or contact Sanus at 800.359.5520 or www.sanus.com. Our customer service representatives can quickly assist
you with installation questions and missing or damaged parts. Replacement parts for products purchased through authorized
dealers will be shipped directly to you. Check carefully to make sure that there are no missing or defective parts. Sanus
Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please
call Sanus Systems before returning products to the point of purchase.
NOTE:
The supplied wall mounting hardware is not for metal stud, concrete, brick, or block walls. If you are uncertain
about the nature of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary
mounting hardware is included. If the hardware you need is not included please consult your local hardware
store or call Sanus Systems.
Required Tools: Drill, 3/16” drill bit, 3/8” drill bit, and a philips screw driver
Supplied Parts and Hardware: (Threaded fasteners are shown actual size.)
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 07.12.06 (6901-100078)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Wall Plate - A
Qty. 2
Cover - B
Qty. 2
Wood Screw - C
Qty. 4
Anchor - D
Qty. 4