Sanus Systems EFB 产品宣传页

Assemble  your  Sanus  Systems  Model  EFSat,  or  HTB  Speaker  Foundation, 

attaching the L-Bracket. You will need the EFB Universal Mounting Bracket (sold 

separately) to mount the speakers.

Use a Phillips screwdriver to remove the two plastic wall spacers that are on the 

back of your speaker, located just above the speaker terminal 

plate.

Pull  the  speaker  wires  through  the  wire  management  and 

connect them to your speaker; then, lay the speaker down with 

the back facing up.

  2221 Hwy 36 West, Saint Paul, MN 55113   2.03.06 (100007)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Open the EFB Package and remove the small Black Spacers and place them over 

the  holes  in  the  back  of  your  speaker  where  the  two  plastic  wall  spacers  were 

removed.

Align the top two slots of the EFB over the two small Black Spacers.

Using a Phillips screwdriver, and the two Screws provided with the EFB, secure the 

EFB and Spacers to the speaker, taking care as to not overtighten the screws.

Slide the Speaker and EFB onto the L-Bracket on the stand.