Canon RS-CL07 用户手册

Replacing the Lamp and Cleaning/Replacing the Air Filter

This Ceiling-mount Hanger allows you to replace the lamp and clean/replace the air filter without dismounting the

projector.

1 Hold the projector, and remove two wing

screws (A) and open the Base bracket

slowly.

2 Replace the lamp, or clean or replace the

air filter.

3 After completion of replacement of the

lamp or cleaning/replacement of the air

filter, lift up the projector, and close the

Base bracket then tighten the wing screw

(A).

Lamp cover

Filter cover

RS-CL10

Lamp cover

Filter cover

RS-CL07

RS-CL10

Adjustment
rangee

Horizontal projection angle

5° leftward or rightward

Vertical projection angle

5° upward or 20° downward

Screen slant angle

± 5 °

Outer dimension of assembly

(excluding projection)

222.7 mm (W）x 281.5 mm (D）x 175.8 mm (H)

0.7' (W) x 0.9' (D) x 0.6' (H)

310.5 mm (W) x 276.2 mm (D) x 178.2 mm (H)

1.0' (W) x 0.9' (D) x 0.6' (H)

Weight (Ceiling-mount Hanger only)

3.7 kg/8.2 lbs

4.1 kg/9.1 lbs

Specifications

● Before replacing the lamp or cleaning/replacing the air filter, be sure to turn off the projector and

unplug the power cord from the AC outlet and that the projector is cooled sufficiently.

● For details on how to replace the lamp and clean/replace the air filter, refer to the User's Manual

that came with the projector.

● Check the projection angle and the screen slant angle after replacing the lamp. For details on how

to adjust the angles, refer to page 11.

Caution