Panasonic SC-HTB770 用户手册
16
RQT9778
Assemble the center speaker:
Connect the speaker cable.
Connect the speaker cable.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Assemble the front speakers:
Attach the stand neck.
Attach the stand neck.
≥ The two front speakers are interchangeable.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Keep the screws out of reach of children to prevent swallowing.
Assemble the front speakers:
Connect the speaker cables.
Connect the speaker cables.
§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm (
25
/
32
q) from the tip, at an angle of approx. 45
o
(as illustrated above).
A Center speaker
connector
1 Insert the wire fully.
r: White
s: Blue line
s: Blue line
A Screw (supplied)
≥ Tighten securely.
1 Insert the wire fully.
r: White
s: Blue line
s: Blue line
≥ Insert the wire fully, taking
care not to insert beyond
the wire insulation.
the wire insulation.
2 Press into the groove.
Push
Green
45
Push
SC-HTB770PPC_RQT9778-1P_mst.book Page 16 Tuesday, January 29, 2013 11:33 AM