Panasonic SC-HTB351 用户手册

RQT9670

This system has a function to make the dialog stand out 
when the volume is low. (> 25)

(When the main unit detects a problem, a safety measure 
is activated and the main unit automatically switches to 
standby mode.)
≥ There is a problem with the amplifier.
≥ Is the volume extremely high?

If so, lower the volume.

≥ Is this system placed in an extremely hot place?

If so, move this system to a cooler place and wait a few 
moments and then try to turn it on again.

If the problem persists, confirm the TV indicator and AUX 
indicator blink, turn the system off, remove the AC power 
supply cord and consult your dealer. Please be sure to 
remember the indicators that were blinking and inform the 
dealer.

Ensure the AC power supply cord of the active subwoofer 
is connected properly.

Unplug the AC power supply cord and consult your dealer.

≥ Check that the active subwoofer is turned on.
≥ Check that the wireless link indicator lights green. 

(> 21)

≥ There is no link between this unit and the active 

subwoofer.
j Check that this unit is turned on.
j Turn the active subwoofer off and then back on. 

Alternatively, turn the active subwoofer off, 
disconnect the AC power supply cord and then 
reconnect it.

≥ The active subwoofer and the main unit may not be 

paired correctly. Try the following operation. (Wireless 
pairing)
1 Turn on the main unit and active subwoofer.
2 Press [ID SET] on the rear of the active subwoofer. 

(The WIRELESS LINK indicator will light red and 
green alternately.)

3 Press and hold [INPUT SELECTOR] on remote 

control and followed by [VOL r] on the main unit for 

more than 2 sec. (The BD/DVD indicator will blink 
and audio format indicators light up in sequence.)

≥ When the wireless pairing is successful, BD/DVD 

indicator will stop flashing and WIRELESS LINK 
indicator lights green. 

4 Turn the main unit off and on.

≥ Consult your dealer if the problem persists.

∫ Frequency band used

This unit uses the 2.4 GHz frequency band.

∫ Certification of this device

≥ This system conforms to frequency restrictions and has 

received certification based on frequency laws. Thus, a 
wireless permit is not necessary.

≥ The action below are punishable by law in some 

countries:
j Taking apart or modifying the unit.
j Removing specification indications.

∫ Restrictions of use

≥ Wireless transmission and/or usage with all Bluetooth

®

 

equipped devices is not guaranteed.

≥ All devices must conform to standards set by Bluetooth 

SIG, Inc.

≥ Depending on the specifications and settings of a 

device, it can fail to connect or some operations can be 
different.

≥ This system supports Bluetooth

®

 security features. But 

depending on the operating environment and/or 
settings, this security is possibly not sufficient. Transmit 
data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

®

 

device.

∫ Range of use

Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment, 
obstacles or interference.

∫ Interference from other devices

≥ When other devices use the same frequency as this 

system, this system may operate incorrectly or the 
sound may be distorted.

≥ To prevent interference from other devices:

j Keep the system away from other devices that emit 

radio frequency interference.

j Do not use this system and a wireless LAN device at 

the same time. Switch off any wireless LAN device.

∫ Intended usage

≥ This unit is for normal, general use only.
≥ Do not use this system near an equipment or in an 

environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc).

SC-HTB351_RQT9670_mst.book  Page 27  Tuesday, March 6, 2012  7:22 PM