Panasonic SC-ZT2 用户手册

VQT2R70

Unplug the AC power supply cord from the household AC outlet and wipe the system using a soft and dry cloth.
•  When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth.
•  Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to come off.
•  Before using chemically treated cloth, read the instructions that come with the cloth carefully.

•  With HDMI connection, this system can play back multi-channel LPCM signals 

with sampling frequencies of over 48 kHz and PCM signals of over 96 kHz in 
addition to multi-channel LPCM of up to 48 kHz and PCM of up to 96 kHz. (If 
frequency exceeds these figures, playback equipment performs down-sampling 
and plays back as 48 kHz signals. However, playback may be impossible 
depending on the discs. See operating instructions of playback equipment for 
more information.)

•  With the optical fiber connection, this system can play multi-channel LPCM signals 

with sampling frequencies of up to 48 kHz and PCM signals of up to 96 kHz.

• See “Glossary” (

➜ page 28) for more detailed information on each signal.

„

  Blu-ray disc, DVD etc.
„

  Blu-ray disc, DVD etc.
„

  CD, DVD audio etc.
„

  Blu-ray disc, DVD audio etc. 
„

•  Confirm “VIERA Link “HDAVI Control” setting” is set to “

ON ” (when the 

operation is linked).

  When it is “

OFF ”, change to “ON ”.

•  VIERA Link “HDAVI Control” does not function in Standby condition (HDMI off mode) 

when this system is turned off. See “Reducing Standby power consumption (In Standby 
condition (HDMI off mode))” and set to “

ON ” (normal power consumption).

•  Check VIERA Link “HDAVI Control” settings of the connected equipment.
•  VIERA Link “HDAVI Control” may not function when you change the 

connections for HDMI equipment, insert and remove the outlet, or during 
blackout. Do the following operations in this case:

 – 

 

Turn on the TV (VIERA) again while all the equipment connected with HDMI 
cables is on. 

  –  Set “VIERA Link “HDAVI Control” (HDMI equipment control)” of the TV (VIERA) to “OFF” and 

then set to “ON” again. (For details, refer to the operating instructions for the TV (VIERA).)

 – 

 

Connect this system to the TV (VIERA) using the HDMI cable, switch the TV 
(VIERA) on, unplug this system’s AC power supply cord, and insert it into a 
household AC outlet again.

23

22

—
—

•  When using VIERA Link “HDAVI Control” and the speaker is set to “TV”, press 

the VIERA Link button on the remote control of the TV (VIERA) and set the 
speaker to “Home Cinema”.

18

This system’s input automatically 
switches to “AUX2 / STB ”, but 
sound is not heard. 
Or unexpected sound from other 
equipment is heard.

•  After “Setting for automatically switching the input source to STB”, the 

connection might have been changed. Select OFF once and SET again.

10

•  When the [WIRELESS LINK] indicator is off, check the connection of the AC 

power supply cord of the speakers and check that each speaker is “ON”.

•  If the [WIRELESS LINK] indicator does not change from red to green, the main unit and speakers 

are not linked. Make sure that the main unit is “ON”. Or make the speaker settings again.

•  You may be using wireless headphones or the wireless LAN may be operating near this 

system. These symptoms may be remedied by slightly moving this system’s position.

12,13,15

13,15

—

•  Amplifier output is abnormal.
•  Straining of the speakers through excessive volume or power.
•  This may occur if you use the system in an extremely hot environment.
  D  Determine and correct the cause, then turn the system on.

(The protection circuit is reset.)
(Consult your dealer if the problem persists.)

—
—
—

5%<622 8364'PKPFF

5%<622 8364'PKPFF

ඦ೨

ඦ೨