Panasonic SKS-HT750 用户指南

 

En-

 

9

 

■

 

Type:

Bass-reflex

Input sensitivity/impedance: 140 mV / 20 k

 

Ω

 

Maximum output power:

230 W (Dynamic Power)

Frequency response: 

25 Hz–150 Hz

Cabinet capacity:

1.3 cubic feet (37 L)

Dimensions (W 

 

×

 

 H 

 

×

 

 D):

10-13/16" 

 

×

 

 19-15/16" 

 

×

 

 

16-3/16" (275 

 

×

 

 507 

 

×

 

 

411 mm)

Weight:

24.7 lbs. (11.2 kg)

Drivers  unit:

10" (25 cm) Cone Woofer 

 

×

 

 1

Power supply:

AC 120 V, 60 Hz

Power consumption: 

140 W

Other:

Auto Standby function

 

■

 

Type:

2 Way Closed Type

Impedance:

8 

 

Ω

 

Maximum input power:

110 W

Output sound pressure level: 79 dB/W/m
Frequency response:

60 Hz–50 kHz

Crossover frequency:

3 kHz

Cabinet capacity:

0.07 cubic feet (2 L)

Dimensions (W 

 

×

 

 H 

 

×

 

 D):

5-1/2" 

 

×

 

 14" 

 

×

 

 3-11/16" 

(140 

 

×

 

 355 

 

×

 

 93 mm)

Weight:

4.0 lbs. (1.8 kg)

Drivers unit:

3-1/8" (8 cm) Cone 
Woofer 

 

×

 

 2

1 inch (2.5 cm) Balanced 
Dome Tweeter 

 

×

 

 1

Terminal:

Spring Type Color Coded

Keyhole slots:

2

Grille:

Fixed

Other:

Magnetic shielding

 

■

 

Type:

2 Way Closed Type

Impedance:

8 

 

Ω

 

Maximum input power:

110 W

Output sound pressure level: 76 dB/W/m
Frequency response:

60 Hz–50 kHz

Crossover frequency:

3 kHz

Cabinet capacity:

0.07 cubic feet (2 L)

Dimensions (W 

 

×

 

 H 

 

×

 

 D):

5-1/2" 

 

×

 

 14" 

 

×

 

 3-11/16" 

(140 

 

×

 

 355 

 

×

 

 93 mm)

Weight:

2.9 lbs. (1.3 kg)

Drivers unit:

3-1/8" (8 cm) Cone 
Woofer 

 

×

 

 1

1 inch (2.5 cm) Balanced 
Dome Tweeter 

 

×

 

 1

Terminal:

Spring Type Color Coded

Keyhole slots:

2

Grille:

Fixed

Other:

Magnetic shielding

 

Specifications and appearance are subject to change 
without prior notice.

 

The speaker cables are not connected properly.

Check the speaker cables and correct as necessary.

The speaker configuration is not set correctly.

Check the speaker configuration.

 

The power plug is not fully inserted into the 
wall outlet.

Insert the power plug fully into the wall outlet.

 

The OUTPUT LEVEL control is set to mini-
mum.

Turn up the OUTPUT LEVEL control.

The RCA cable is not properly connected to 
the subwoofer’s LINE INPUT.

Make sure that the RCA cable is properly con-
nected to the subwoofer’s LINE INPUT.

The level of the input signal was too low and 
the subwoofer entered Standby mode.

Slightly increase the subwoofer pre out output level 
on your AV receiver.

The Subwoofer configuration is not set cor-
rectly.

Check the subwoofer setting in the speaker config-
uration on your AV receiver.

 

The source material contain little or no bass 
content.

Choose source material with more bass content.

 

The RCA cable is not properly connected to 
the subwoofer’s LINE INPUT.

Make sure that the RCA cable is properly con-
nected to the subwoofer’s LINE INPUT.

External interference from a TV or other elec-
tronic device is being picked up.

Move the subwoofer and RCA cable away from the 
interference source. Make sure your audio system 
is grounded properly.

SKS-HT750_En,Fr,Es.book Page 9 Thursday, July 19, 2007 10:03 AM