Panasonic SCHT56 用户手册

下载
页码 24
7
RQTX0175
1
2
PUSH
PUSH
Digital transmitter cover
Rear panel of the main unit
TRANSMITTER
DIGITAL
PUSH
PUSH
Push!
Push!
STEP 1 
Speaker setup
Set your sound free with Panasonic’s wireless 
receiver and speaker systems
Attach the SH-FX67 digital transmitter for wireless surround sound.
You  can  also  connect  your  portable  audio  equipment  to  the  wireless 
system.
For details, refer to the operating instructions for SH-FX67.
Wireless system connection
You can use the blunt end of a writing instrument 
to push here until the cover pops out.
Remove  the  digital  transmitter  cover  before  installing  any  optional 
Panasonic wireless accessory.
Replace the cover when the digital transmitter is not in use.
Note
Other speaker setup options
Turn off all components before making any connections.
Peripheral equipment and cables sold separately 
unless otherwise indicated.
To connect equipment, refer to the appropriate 
operating instructions.
 Fitting optional speaker stands
    (For front, center and surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between 
screws as shown in the diagram.
The stands must be able to support over 10 k
g (22 lb.).
The stands must be stable even if the speakers are in a high position.

 Attaching to a wall
You can attach the surround, center and front speakers to a wall.
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k
g (22 lb.) per screw. Consult a 
qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and 
speakers.
Plate thickness plus 
7.0 mm (
9
/
32
") to  
10 mm (
13
/
32
")
Speaker stand
(not included)
Metal screw 
hole
For attaching 
to speaker 
stands.
Example: Surround speaker
5.0 mm (
3
/
16
"), pitch 0.8 mm (
1
/
32
")
At least 30 mm (1
3
/
16
")
Front speakers
Drive the screw (not included) into the wall
Fit the speaker securely onto the screw(s) with the hole(s)
Ø4.0 mm (
5
/
32
")
Ø7.0 mm (
9
/
32
") 
to 9.4 mm (
11
/
32
")
4.0 mm (
5
/
32
") 
to 6.0 mm (
1
/
4
")
Wall or pillar
Center speaker
Surround speaker
190 mm 
(7
15
/
32
")
If irregular coloring occurs on your television
The  supplied  speakers  are  designed  to  be  used  close  to  a 
television, but the picture may be affected with some televisions 
and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The  television's  demagnetizing  function  should  correct  the 
problem. If it persists, move the speakers further away from the 
television.
Caution
Use the speakers only with the recommended 
system.  Failure  to  do  so  can  damage  the 
amplifier and speakers, and can cause fire. 
Consult a qualified service person if damage 
occurs or if a sudden change in performance 
is apparent.
Do  not  attempt  to  attach  these  speakers 
to  walls  using  methods  other  than  those 
described in this manual.
Notes on front speakers
These speakers do not have magnetic shielding. Do not place 
them  near  televisions,  personal  computers  or  other  devices 
easily influenced by magnetism.
SC-HT56P_MP (RQTX0175-2P).indb   7
9/19/2008   12:28:08 PM