Panasonic SC-ALL3 用户手册
- 18 -
1
Disconnect the AC power supply cord (AC mains lead).
2
Connect this unit to a broadband router, etc. using a LAN cable.
3
Connect the AC power supply cord (AC mains lead) to this unit,
and turn the unit on.
and turn the unit on.
≥ When the connection is established, the network indicator (blue) lights up.
≥ Use category 5 or above straight LAN cables (STP) when connecting to
peripheral devices.
≥ The LAN cable must be connected or disconnected while the AC power supply
cord (AC mains lead) is disconnected.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the
unit.
≥ If the LAN cable is disconnected, the network-related settings (
l 19) will be
initialized. In that case, make the settings again.
≥ When a LAN cable is connected, the Wi-Fi function will be disabled.
– Power consumption will be reduced when the unit is turned on or is in
standby mode.
Using a LAN cable
Broadband router, etc.
e.g.,
LAN cable (not supplied)