Panasonic PT-DZ16KE 用户手册

Chapter 4 Settings — [NETWORK] menu

ENGLISH - 127

When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the 

[Projector status] screen, click it to display the 

error/warning details.

 

f

The projector may go into the standby status to protect the projector depending on the contents of the error.

1

Displays the item check results.

Indicates that operation is normal.

Indicates that there is a problem.

Indicates that there is a warning.

r

[MAIN CPU BUS]

There is a problem with the microcomputer circuitry. Consult your dealer.

[FAN]

There is a problem with the fan or the fan drive circuit. Consult your dealer.

[INTAKE AIR TEMPERATURE]

The intake air temperature is too high. The projector may be used in an environment 

where the temperature is high, such as near a heating appliance.

[OPTICS MODULE TEMPERATURE]

The temperature around the optics module inside the projector is high. The projector 

may be used in an environment where the temperature is high, such as near a heating 

appliance.

[AROUND LAMP TEMPERATURE]

The temperature around the lamp is high. The air exhaust port may be blocked.

[LAMP1 REMAIN TIME]

The runtime of the lamp has exceeded the specified time, and it is time to replace the 

lamp.

[LAMP2 REMAIN TIME]
[LAMP3 REMAIN TIME]
[LAMP4 REMAIN TIME]
[LAMP1 STATUS]

The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then 

turn on the power.

[LAMP2 STATUS]
[LAMP3 STATUS]
[LAMP4 STATUS]
[APERTURE(CONTRAST-SHUTTER)]

There is a problem in the contrast shutter circuit for dynamic iris. Consult your dealer.

[SHUTTER(MUTE-SHUTTER)]

There is a problem with the shutter circuitry. Consult your dealer.

[INTAKE AIR TEMP.SENSOR]

There is a problem with the sensor used to detect intake temperature. Consult your 

dealer.

[OPTICS MODULE TEMP.SENSOR]

There is a problem with the sensor used to detect temperature inside the projector. 

Consult your dealer.

[AROUND LAMP TEMP.SENSOR]

There is a problem with the sensor used to detect exhaust air temperature. Consult your 

dealer.

[BATTERY]

Battery replacement is required. Consult your dealer.

[LENS MOUNTER]

There is a problem in the lens mounter. Consult your dealer.

[BRIGHTNESS SENSOR]

There is a problem with the luminance sensor. If problems persist even after switching 

on the power, consult your dealer.

[ANGLE SENSOR]

There is a problem with the sensor that detects angle. Consult your dealer.

[FILTER UNIT]

The air filter unit is not attached. Check the connection of the air filter unit. 

(x page 143)