Panasonic PT-DS20KU 用户手册

Refer to “Navigating through the menu” 



 

z

After selecting the item, press ▲▼◀▶ to set.

You can move the image position vertically or 

horizontally if the image position projected on the 

screen is shifted even when the relative position of the 

projector and the screen is installed correctly.

1)  Press ▲▼ to select [SHIFT].
2)  Press the <ENTER> button.

▶

z

The 

[SHIFT] screen is displayed.

3)  Press ▲▼◀▶ to adjust the position.

▶

■For vertical (up and down) 

Press ▲ .

The picture 

position moves 

up.

Press ▼ .

The picture 

position moves 

down.

▶

■For horizontal (right and left) 

Press ▶ .

The picture 

position moves to 

the right.

Press ◀ .

The picture 

position moves to 

the left.

You can switch the aspect ratio of the image.

The aspect ratio is switched within the screen range 

selected in [SCREEN SETTING]. Set [SCREEN 

SETTING] first.(



 page 90)

1)  Press ▲▼ to select [ASPECT].
2)  Press ◀▶ or the <ENTER> button.

▶

z

The 

[ASPECT] individual adjustment screen is 

displayed.

3)  Press ◀▶ to switch the [ASPECT].

▶

z

The setting will change as follows each time 

you press the button.

*1:  For video signals and Y/C signals (NTSC) only

*2:  For RGB (480i or 480p) signal input only

▶

■[DEFAULT]

Pictures are displayed without changing the aspect 

ratio of the input signals.

▶

■[VID AUTO]

The projector identifies the video ID (VID) embedded 

in the image signals and displays the image by 

automatically switching the screen sizes between 4:3 

and 16:9. This function is effective for NTSC signals.

▶

■[AUTO]

The projector identifies the video ID (VID) embedded 

in the image signals and displays the image by 

automatically switching the screen sizes between 

4:3 and 16:9. This function is effective for 480i/480p 

signals.

▶

■[THROUGH]

Pictures are displayed without changing the resolution 

of the input signals.