Panasonic SC-BTT190 用户手册

VQT4D57

∫ HDMI Output
Press [OK] to show the following settings:

¾

The items supported by the connected devices are 
indicated on the screen as “¢”. When any item 
without “¢” is selected, the images may be distorted.
≥ If “Automatic” is selected, the best suited 

output resolution to the connected television 
is automatically selected.

≥ To enjoy high-definition video up-converted to 

1080p, you need to connect the unit directly 
to 1080p compatible HDTV (High Definition 
Television). If this unit is connected to an 
HDTV through other equipment, the other 
equipment must also be 1080p compatible.

¾

When this unit is connected to a TV supporting 1080/
24p output using an HDMI cable, movies and other 
material recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then 

set “24p” in “Picture Settings” (> 29) to “On”.

≥ When BD-Video images other than 24p are 

played, images are output at 60p.

≥ 24p: A progressive image recorded at a rate 

of 24 frames per second (motion-picture film). 
Many BD-Video movie contents are recorded 
in 24 frames/second in accordance with the 
film materials.

¾

This setting is for selecting colour-space 
conversion of the image signal when the unit is 
connected using an HDMI cable.

¾

This setting is for selecting whether to use Deep 
Colour output when a television that supports 
Deep Colour is connected.

¾

Depending on the playback content, the TV will 
output adjusting to the optimal method when a 
TV that supports this function is connected.

∫ Still Mode
Select the type of picture shown when you pause 
playback.

∫ Seamless Play
The chapter segments in playlists are played 
seamlessly.
≥ Select “On”, when the picture freezes for a 

moment at the chapters segment in playlists.

∫ Surround Effects 

 (> 30)

∫ Sound Effects 

 (> 30)

∫ Dynamic Range Compression
You can listen at low volumes but still hear 
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby 
TrueHD only)
≥ “Automatic” is effective only when playing Dolby 

TrueHD.

∫ Digital Audio Output
Press [OK] to show the following settings:

¾

¾

¾

Select the audio signal to output.
≥ Select “PCM”, when the connected equipment 

cannot decode the respective audio format. This 
unit decodes the audio format and transmits to 
the connected equipment.

≥ Not making the proper settings may result in noise.

Automatically selects the type 
of picture shown.

Select if jittering occurs when 
“Automatic” is selected.

Select if small text or fine 
patterns cannot be seen clearly 
when “Automatic” is selected.

SC-BTT190GNGSGA-VQT4D57_mst.book  32 ページ  ２０１２年１月１２日　木曜日　午前９時５９分