Panasonic SC-BT730 用户手册

VQT2M13

The following do not indicate a problem with this unit:
≥ Regular disc rotating sounds.
≥ Image disturbance during search.

∫ Unit does not respond to the remote control 

Press and hold [POWER

Í/I] on the main unit for 5 seconds. 

jIf still unable to power the unit off, disconnect the power cord, 

wait 1 minute, then reconnect the power cord.

∫ Cannot eject disc.

The unit may have a problem.
While the unit is off, press and hold [SKIP

9] on the remote 

control and [

< OPEN/CLOSE] on the unit at the same time for 

more than 5 seconds.

To return to the factory preset
≥ Select “Yes” in “Restore Default Settings” in the Setup menu. 

(

> 38)

To return all settings to the factory preset
≥ Reset the unit as follows:

While the unit is off, press and hold [+ VOLUME], [

< OPEN/

CLOSE] and [POWER

Í/I] on the main unit at the same 

time for more than 5 seconds.

The remote control doesn’t work properly.
≥ The remote control and main unit are using different codes. 

Change the code on the remote control. (

> 22)

≥ It may be necessary to set the code of the remote control 

again after changing the batteries for remote control. (

> 22)

Disc cannot be played.
≥ The disc is dirty. (> 9)

Still pictures (JPEG) do not playback normally.
≥ The images that were edited on the PC, such as Progressive 

JPEG, etc., may not playback.

The TV tuner mode is not displayed when the TV is 
switched on.
≥ This phenomenon may occur, depending on the TV setting, 

when “Quick Start” is set to “On”.

≥ Depending on the TV, this phenomenon may be prevented 

by reconnecting the HDMI cable to a different HDMI input 
terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.
You want to cancel the ratings level.
While the disc tray is empty and “BD/DVD” is selected as a 
source, press and hold [SKIP

:] on the remote control and 

1] (Play) on the unit at the same time for more than 5 

seconds. The ratings level returns to the factory preset.

No power.
≥ Insert the AC power supply cord securely into a household 

AC outlet. (

> 18)

The unit switches to standby mode.
≥ When the time set for the sleep timer has passed, the power 

will be turned off. (

> 6)

≥ One of the unit’s safety devices is activated. Press 

[POWER

Í/I] on the main unit to turn the unit on.

≥ This unit will automatically turn to standby mode after 30 

minutes if it is inactive. (

> 7)

Power of this unit is turned off when the input for the TV is 
changed.
≥ This is a normal phenomenon when using VIERA Link 

(HDAVI Control 4 or later). For details please read the 
operating instructions for the TV.

The display is dim.
≥ Change “FL Display” in the Setup menu. (> 37)

The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
≥ An incorrect resolution is selected in “HDMI Resolution”.

Reset the setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a 
source, press and hold [

1] (Play) and [∫] (Stop) on the main 

unit at the same time for more than 5 seconds to cancel the 
setting.

jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio 

are not output in bitstream, select “Yes” in “Restore Default 
Settings” and make proper settings. (

> 38)

Firmware updates may be released to correct operating 
irregularities that are discovered with certain movies. (

> 21)

4

 

: 

http://www2.panasonic.com/consumer-electronics/support/
Enter the model number.
For Canada : 
http://www.panasonic.ca

4

Even so, you still have trouble,

You can find a service center near you easily on our website.

Other support information:
“Customer Services Directory (United States and Puerto 
Rico)” (

> 50) or “Limited Warranty (Only for 

CANADA)” (

> 51).

General operation

Power

Displays

TV screen and video

SC-BT230_330_730P_PC_VQT2M13_eng.book  41 ページ  ２０１０年１月６日　水曜日　午後１２時８分