Runco X-200i 用户手册
Runco X-200i Series Installation/Operation Manual
45
PRE
L
IMINAR
Y
Whitney (Prismatic)
Anamorphic Lens
Installation and
Adjustment
Anamorphic Lens
Installation and
Adjustment
The Whitney Anamorphic lens mount kit consists of everything shown in Figure 3-20.
Some components shipped with your projector may differ slightly from what is shown in
these instructions.
Some components shipped with your projector may differ slightly from what is shown in
these instructions.
Figure 3-20. Prismatic Anamorphic Lens Mounting Assembly - Exploded View
1.
Use the Height/Pitch Adjustment Screws (3) and Washers (2) to attach the Lens
Mounting Bracket (5) to the Anamorphic Lens (1).
Mounting Bracket (5) to the Anamorphic Lens (1).
2.
Remove the nut and rubber collar from each Swell Latch Assembly (4).
3.
Secure the lens (with the mounting bracket attached) to the Lens Base Plate (6) using
the swell latches.
the swell latches.
To avoid clipping the corners of the image, position the anamorphic
lens as close as possible to the primary lens.
lens as close as possible to the primary lens.
3 Height/Pitch
Adjustment
Screw,
4-40 x 1/4"
(4x)
Adjustment
Screw,
4-40 x 1/4"
(4x)
4 Swell
Latch
Assembly
(2x)
Latch
Assembly
(2x)
1 Anamorphic Lens
2 Washer (4x)
6 Anamorphic Lens
Base Plate
Base Plate
5 Anamorphic Lens
Mounting Bracket
Mounting Bracket
Tip