Sony HM-982RW 用户手册
72
XXXXXXXXX
Preparation section
Basic section
Application section
Knowledge section
Select the “CDR” input. Be sure to put the CD recorder in stop mode.
There are two methods of erasure.
÷ Erasing only the last recorded track in a CD-RW
÷ Erasing only the last recorded track in a CD-RW
÷ Erasing all tracks in a CD-RW
1 Place a recordable CD-RW disc.
78
2 Press the ERASE key repeatedly until "Erase 15 ?"
is displayed.
3 Press the SET key.
Erasure of CD-RW recording
÷ The time until the completion of erasure is displayed.
÷ Do not perform any other operation during erasure.
÷ "Complete" is displayed when erasure completes.
÷ To abort unfinalization, press the ERASE key or 7 STOP key.
4 Press the ENTER key to start erasure.
Example: To erase the last track (15th track) in a disc
containing 15 tracks
Erasing the last recorded track
UN FINALIZE D
SKIP PLAY
ERASE
E r a s e
1 5 ?
UN FINALIZE D CD -R W
REMAIN
SKIP PLAY
ERASE
C D R
0 : 0 8
CLEAR
ERASE
SET
ENTER
Recording in a recordable (i.e. non-finalized or unfinalized) CD-RW can be erased as described below.
"ERASE" blinks
Blinks
UN FINALIZE D
SKIP PLAY
ERASE
E r a s e
O k ?
Blinks
To repeat erasure
Repeat steps
2 to 4.
Once erased, the tracks and data cannot be restored
to the condition before erasure.
to the condition before erasure.
÷ Ensure that the disc has no scratch or dirt on the surface.
÷ The "CD-RW" indicator should light. If the "FINALIZED CD-
RW" indicator lights, the disc is a finalized disc.
Lights
Blinks
÷ In step 2, select "Erase XX". Here, "XX" is the track
number of the last track in the disc.
If the power supply is interrupted by a power failure
or unplugging the power cord during erasure, the
data may be destroyed and become unplayable.
or unplugging the power cord during erasure, the
data may be destroyed and become unplayable.
Never unplug the power cord during erasure.
CD -R W
SKIP PLAY
"Erase 15 ?"
"Erase All ?"
Normal display
"Erase All ?"
Normal display
Each press switches alternately.