Tascam SN29401376 用户手册
Appendix
En-84
Connection Tips and
Video Signal Path
Video Signal Path
The AV receiver supports several connection formats for
compatibility with a wide range of AV equipment. The
format you choose will depend on the formats supported by
your components. Use the following sections as a guide.
compatibility with a wide range of AV equipment. The
format you choose will depend on the formats supported by
your components. Use the following sections as a guide.
Video components can be connected by using any one of
the following video connection formats: composite video,
component video, or HDMI, the latter offering the best
picture quality.
the following video connection formats: composite video,
component video, or HDMI, the latter offering the best
picture quality.
Tip
• To by-pass the upconversion, set the “Picture Mode” setting to
“Direct” (
Video input signals flow through the AV receiver as
shown, with composite video and component video
sources all being upconverted for the HDMI output. The
composite video and component video outputs carry their
respective input signals as they are.
When you connect a video component to an HDMI,
COMPONENT or COMPOSITE input, you must assign
that input to an input selector (
shown, with composite video and component video
sources all being upconverted for the HDMI output. The
composite video and component video outputs carry their
respective input signals as they are.
When you connect a video component to an HDMI,
COMPONENT or COMPOSITE input, you must assign
that input to an input selector (
■
Signal Selection
If signals are present at more than one input, the inputs will
be selected automatically in the following order of priority:
HDMI, component video, composite video.
However, for component video only, regardless of whether
a component video signal is actually present, if a
component video input is assigned to the input selector,
that component video input will be selected. And if no
component video input is assigned to the input selector,
this will be interpreted as no component video signal being
present.
In the Signal Selection Example shown below, video
signals are present at both the HDMI and composite video
inputs. However, the HDMI signal is automatically
selected as the source and the video is output by the HDMI
outputs.
be selected automatically in the following order of priority:
HDMI, component video, composite video.
However, for component video only, regardless of whether
a component video signal is actually present, if a
component video input is assigned to the input selector,
that component video input will be selected. And if no
component video input is assigned to the input selector,
this will be interpreted as no component video signal being
present.
In the Signal Selection Example shown below, video
signals are present at both the HDMI and composite video
inputs. However, the HDMI signal is automatically
selected as the source and the video is output by the HDMI
outputs.
The on-screen menus appear only on a TV that is
connected to
connected to
HDMI OUT. If your TV is connected to
other video outputs, use the AV receiver’s display
when changing settings.
when changing settings.
Video Connection Formats
IN
MONITOR OUT
Blu-ray Disc/DVD player, etc.
AV receiver
TV, projector, etc.
Composite
Composite
Component
Component
Video Signal Flow Chart
HDMI
HDMI
IN
MONITOR OUT
Blu-ray Disc/DVD player, etc.
AV receiver
TV, projector, etc.
Composite
Composite
Component
Component
Signal Selection Example
HDMI
HDMI