JVC XV-THM303 用户手册

IMPORTANT
Before using the remote control for the following 
operation; 
• Set the remote control mode selector to 

AUDIO.

NOTE
Before you start operation;

• There is a time limit when doing the following steps. If the setting is 

cancelled before you finish, start from step 1 again.

Example:

Press Cursor Y/5 to select the item 
you want to set.

• BAL (Balance):

You can adjust the balance between the front left and front 
right speakers.

• DEC (Decode):

When you play an external source (AUX DIGITAL is 
selected as a source) that was encoded with Dolby Digital or 
DTS Digital Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters 

or tracks.

AUT/PCM (Auto/PCM):

Normally select this. The system automatically 
detects the incoming signals.

DOLBY D: Select this if the symptoms above occur when 

playing a disc (or software) encoded with 
Dolby Digital.

DTS:

Select this if the symptoms above occur when 
playing a disc (or software) encoded with DTS 
Digital Surround.

Press Cursor 3/2 to make an 
adjustment or selection.

Example:

The adjustment is set and display automatically disappears a 
few seconds later.

• When “DOLBY D” or “DTS” is selected, if a signal encoded with 

another digital format comes in, you cannot listen to the sound. (The 
GDIGITAL or C indicator flashes.)

B A L : C E N T E R

B A L :

R

-- 5

See page 22 for button locations.

TH-M303[B].book  Page 33  Monday, February 9, 2004  4:53 PM