Windsor SC20T 用户手册

SABER (SC)   86038350   01/29/07 

 

 
NOTE:  All original equipment brushes are equipped 
with “Perform Alert

©”.  This feature will tell the 

©” brushes have pre-trimmed bright 

yellow tufts to indicate the length of a worn out 
brush.  When the tufts in the scrub brush wear to a 
length equal to the yellow tufts, the scrub brush 
should be replaced.   
 
There are five different types of brushes available to 
cover applications from cleaning heavily soiled floors 
to polishing.  A pad driver is also available to take 
advantage of the many cleaning pads on the market 
and further add to the flexibility of the Saber 
Compact.  Please refer to the following to assist in 
selecting the proper brush or pad for the work at 
hand. 
 

Aggressive Grit is a nylon fiber impregnated with 
silicone carbide grit.  It grinds away stain, soil, and 
removes surface material. 
 
Mild Grit is a less aggressive silicone carbide grit 
suitable for cleaning medium soil conditions.  
Advantages are faster ground speed than nylon 
bristles on light solid applications. 
 
Nylon is a general-purpose scrub brush with stiff 
bristles.  Polypropylene works well for maintaining 
concrete, wood and tile floors. 
 

Nylon Polish is the softest brush.  It will gently clean 
finished tile or terrazzo floors without removing floor 
finish or floor material.  Used for washing highly 
polished or burnished floors. 
 
Nylon bristles are used in a variety of applications 
on coated or uncoated surfaces. 
 
White Pads (Polishing) are used for dry polishing to 
achieve a high-gloss appearance, or surface 
washing on highly polished or burnished floors. 
 
Red Pads (Buffing) are used for light-duty 
scrubbing.  When used with a mild detergent they 
will provide surface cleaning without removing the 
finish. 
 
 
 
 
 

 
 
Blue Pads (Scrubbing) are used for heavy-duty 
scrubbing and light stripping.  The blue pads remove 
less finish than brown stripping pads, yet will remove 
black marks, stains and dirt. 
 
Brown Pads (Stripping) are used for easy and 
complete removal of old floor waxes/finishes.  They 
will quickly remove ground in dirt, black heel marks, 
and spills.  When used with the proper stripper, this 
pad leaves the floor clean and ready for finishing. 
 
The scrub brush should be checked before each 
days work for wire, string, wear and damage.  The 
scrub brush should be replaced if brush bristles are 
missing or if yellow Perform Alert 

© indicates 

minimum brush length. 
 

1.  With the scrub deck up, turn the machine power 

off. 

 
FOR SAFETY: Before leaving or servicing the 
machine; stop on level surface, turn OFF 
machine and remove key. 
 
2.  Locate release lever on top of brush or pad 

driver.  Rotate release lever counter-clockwise 
and the brush/pad driver will release and drop 
down. 

 
3.  To reinstall, center the brush driver under the 

brush drive hub.  Raise until it contacts brush 
driver assembly.  Turn clockwise until release 
lever plate locks into position. 

 
NOTE:  Check that release plate is completely 
closed and pad/brush is securely attached.  Damage 
to driver or brush could occur.