Clarke GU 18 DMU 用户手册

 10 

The Wand  (13) is not supplied as a standard item in all variants of 
these machines. Do like this in order to use the wand.
1.  Push the machine to upright locked position. The brush motor will 
then stop (Dual-version only), and the brush will be lifted up from the 
surface at other versions. Then slide the Wand out of its holder. 
2. Use the wand for cleaning hard to reach places like fl oor corners, 
or furnitures.  

These tools are not standard items in all machine variants. 
Use these tools for a better cleaning performance at hard to reach 
areas.  A Crevice Tool (14) and Dusting Brush (21) is placed comfort-
able at the machine, just behind the wand. 

Remove the wand from the vacuum cleaner and you will have free 
access to the Tools. 

1. The dusting brush is placed in the upper section of the cleaner.
2. The crevice tool is placed in the lower section of the cleaner.

  

Foot pedal must be used 
to release base to 
operating/non operation 
position. Failure to do so 
could result in damage to 
the handle release  
mechanism. 

3. Install the Crevice Tool or Dusting Brush on the end of the Wand, 
if desired. Now the vacuum cleaner will have an extended coverage 
performance and can be used for cleaning hard to reach areas like 
roof strips, or furnitures.

Foot pedal must be used 
to release base to 
operating/non operation 
position. Failure to do so 
could result in damage to 
the handle release  
mechanism.