Rinnai R63LSE2 用户手册
VA Series Outdoor LS Manual
3
Specifications
Model
R63LSe2
R75LSe
R94LSe
R98LSe
R98LSe-
ASME
Minimum Gas Consumption Btu/h
15,000
19,000
Maximum Gas Consumption Btu/h
150,000
199,000
180,000 237,000
Hot water capacity (Min - Max) *
0.6 - 6.3 GPM
(2.3 - 24 L/min)
0.6 - 7.5 GPM
(2.3 - 28 L/min)
L/min)
0.6 - 9.4 GPM
(2.3 - 35.5
0.6 - 9.8 GPM
(2.3 - 37 L/min)
Hot water capacity, (45ºF rise)
5.5 GPM
(20.8 L/min)
6.6 GPM
(25 L/min)
7.4 GPM
(28 L/min)
8.7 GPM
(33 L/min)
Default Temperature Setting (no controller)
120º F (49º C)
Temperature Controller Default Setting
104º F (40º C)
Maximum Temp Setting (Commercial **)
160º F (71º C)
185º F (85º C)
Maximum Temp Setting (Residential)
Selectable at 120º F (49º C) or at 140º F (60º C)
140º F (60º C)
Minimum Temperature Setting
98º F (37º C)
Weight
46 lb
(21 kg)
55 lb
(25 kg)
Efficiency Rating
Noise level
49 dB (A)
Electrical
Consumption
Consumption
Normal
45 W
50 W
55 W
72 W
Standby
Anti-frost Protection
100 W
116 W
By-Pass Control
Fixed
Electronic
Minimum Gas Supply
Pr
Pr
see Temperature Ranges for more information
essure
Natural Gas
5.0 inch W.C.
Propane
8.0 inch W.C.
Maximum Gas Supply
Pressure
Pressure
Natural Gas
10.5 inch W.C.
Propane
13.5 inch W.C.
Type of Appliance
Temperature controlled continuous flow gas hot water system.
Operation
With or without temperature controls, mounted in kitchen, bathroom, etc.
Approved Gas Type
Natural Gas or Propane - Ensure unit matches gas type it's being installed on.
Connections
Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water Outlet: 3/4" MNPT
Ignition System
Direct Electronic Ignition
Electric Connections
Appliance: AC 120 Volts, 60Hz. Temperature Control: DC 12 Volts (Digital)
Water Temperature Control
Simulation Feedforward and Feedback.
Water Supply Pressure
Minimum Water Pressure: 20 PSI (Recommended 30-80 PSI for maximum performance)
Maximum Water Supply Pressure
150 PSI
Temperature Control Cable
Non-Polarized Two Core Cable (Minimum 22 AWG)
2 W
Rinnai is continually updating and improving products. Therefore, specifications are subject to change without
prio
prio
** for commercial and hydronic applications requiring higher temperatures.
r notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value
listed is for the purpose of input adjustment.
listed is for the purpose of input adjustment.
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
83.0%
Energy Star Qualified
No
Yes
Yes Yes
No