3D Connexion 7318 用户手册
11
b
z
x
c
v
z
x
c
b
v
q
w
e
r
t
y
Threading the Machine
To set the needle thread:
Raise the thread take-up lever to the highest
position by turning the handwheel.
Raise the presser foot.
Raise the thread take-up lever to the highest
position by turning the handwheel.
Raise the presser foot.
z
Draw the thread from the spool and pass it
under the thread guide. Then draw it down
along the right channel.
under the thread guide. Then draw it down
along the right channel.
q
Thread guide
w
Right channel
x
Draw the thread up around the bottom of the
thread guide plate.
Pull the thread up along the left channel
thread guide plate.
Pull the thread up along the left channel
e
Thread guide plate
r
Left channel
c
Firmly draw the thread from right to left over
the thread take-up lever and down into the
take-up lever eye.
the thread take-up lever and down into the
take-up lever eye.
t
Thread take-up lever
v
Draw the thread down along the left channel
and slip the thread behind the needle bar
thread guide from the left.
and slip the thread behind the needle bar
thread guide from the left.
y
Needle bar thread guide
b
Pass the thread through the needle eye from
the front or use the needle threader (refer to
the next page).
the front or use the needle threader (refer to
the next page).