Pfaff 583 用户手册

Installation and commissioning

● For machines delivered without table, plate 1 (included in the accessories) must be

mounted underneath the table top in such a way that the switching plate 2 is fl ush with

plate 1 when the sewing head is tilted upright.

● Loosen screws 3 and align carrier 4 in such a way that switching plate 2 is free when the

sewing head is on its side, and pressed, when the sewing head is upright.

● Connect connectors of the approach barrier on contacts 5 (red/blue) and 6 (grey/pink).

.07

Checking the start inhibitor function

● Switch the machine on at the main switch and tilt back the sewing head.

● The error message "Er 0 16" (on MD-4-58-220-CE) or "Error 9 (on PicoDrive P41 PD2)

must appear on the control panel.

● If the message does not appear, check the setting of safety switch 2.

● After the sewing head has been returned to the upright position, the machine is ready

for operation again.

Fig. 8 - 09

.06

Mount and connect approach barrier