Husqvarna C10 用户手册

27

1.  Hold the upper thread with the left 

hand. Turn the handwheel toward 
you (counterclockwise) lowering, then 
raising the needle. 

2.  Gently pull on the upper thread to 

bring the bobbin thread up through the 
needle plate hole. The bobbin thread 
will come up in a loop.

3.  Pull both threads to the back under the 

presser foot.

Raise the presser foot. Remove the fabric, 
draw the threads to the left side of the face 
cover and cut using the thread cutter.

The threads are cut at the proper length to 
start the next seam.