Husqvarna C10 用户手册

38

These setting apply only to patterns 01-05. The pre-set 
position is “3.5”, center position. When you press the “-“ 
stitch width adjustment button, the needle position will 
move to the left. When you press the “+” stitch width 
adjustment button, the needle position will move to the 
right. On the LCD screen, the point illustration and the 
number indicate the needle position. 

To shorten the stitch length, press the “-“ stitch length 
adjustment button. For a longer stitch length, press the 
“+” stitch length adjustment button.

Generally speaking, the thicker the fabric, thread and 
needle, the longer the stitch should be.

The maximum zigzag stitch width for zigzag stitching 
is “7.0”; however, the width can be reduced on any 
patterns. The width increases as you press the “+” stitch 
width adjustment button from “0.0-7.0”. 

The density of zigzag stitches increase as the setting of 
stitch length approaches “0.2”.

Most zigzag stitches are sewn at “1.0-2.5”.

Dense zigzag stitches (close together) are referred to as 
a satin stitch.