Husqvarna C10 用户手册
42
BUTTON SEWING
Please note: The button sewing foot only
comes with model C20.
comes with model C20.
2. Position the fabric under the foot. Place
the button in the desired position, lower
the foot on to the button.
the foot on to the button.
3. Select zig zag pattern. Adjust the stitch
width to “2.0-7.0” according to the distance
between the two holes of the button.
between the two holes of the button.
4. Turn the handwheel to check that the
needle goes cleanly into the left and right
holes of the button.
holes of the button.
5. Before sewing, press the Auto-lock
button to automatically sew reinforcement
stitches at the beginning and at the end of
the stitch.
stitches at the beginning and at the end of
the stitch.
6 For buttons with 4 holes, sew the two front
holes fi rst, pull fabric forward and then
sew the two holes back.
sew the two holes back.
Change the presser foot to the button sewing
foot.
foot.
1. Move the feed dog adjustment lever to
to lower the feed dogs.