Husqvarna C10 用户手册
52
FREE-MOTION, DARNING, EMBROIDERY AND MONOGRAMMING
Move the drop feed control to “
“ to lower
the feed dogs.
Remove the presser foot holder, and attach
the free-motion/darning foot to the presser
foot holder bar. The lever (a) should be
behind the needle clamp screw (b). Press the
free-motion/darning foot on fi rmly from behind
with your index fi nger and tighten the screw
(c).
the free-motion/darning foot to the presser
foot holder bar. The lever (a) should be
behind the needle clamp screw (b). Press the
free-motion/darning foot on fi rmly from behind
with your index fi nger and tighten the screw
(c).
Darning
Please Note: Free-motion darning is accomplished without the sewing machine internal
feed system. Movement of the fabric is controlled by the operator. It is necessary to
coordinate sewing speed and movement of fabric.
feed system. Movement of the fabric is controlled by the operator. It is necessary to
coordinate sewing speed and movement of fabric.
Begin by sewing around the edges of the
hole (to secure the threads). Working from
left to right, sew over the hole in a constant
and continuous movement. Turn the work by
1/4 and sew over the fi rst stitching moving
the work slower over the hole to separate the
threads and not form big gaps between the
threads.
hole (to secure the threads). Working from
left to right, sew over the hole in a constant
and continuous movement. Turn the work by
1/4 and sew over the fi rst stitching moving
the work slower over the hole to separate the
threads and not form big gaps between the
threads.