Janome MS-5027 用户手册

94

1

8

7

6

5

4

3

2

1

6

5

4

3

2

9

1

5

4

3

2

6

3

Needle thread
Bobbin thread
Buttonhole foot
Gear
Slot
Starting point

Attach the buttonhole foot     . Adjust the position of the
gear    , so it is aligned with the starting point of the
template     . The lever can be used to change gear
positions.  Pull the bobbin thread up through the guide slot
of the buttonhole guide plate by turning the handwheel
counterclockwise while holding the needle thread.  Place
the bobbin and needle threads to the left side of the guide
plate.  Leave 3" to 4" (7.0 to 10.0 cm) of thread.

Guide slot
Guide block
Buttonhole guide plate
Buttonhole template
Catch
Setting mark
Gear
Base plate
Lever

Select a buttonhole template     . Pull back the guide plate
catch     , and slide the template into the guide plate      to
get the desired buttonhole. Release the catch to lock the
template into place. Insert the gear     of the base plate into
the template guide slot     so that the guide block     fits into
the center of the guide slot.

1

5

4

3

2

6
7
8
9

4

5

3

7

1

2

4

6