3M G5 用户手册

下载
页码 77
 
Overview 
 3M™ Drive-Thru Systems Model G5 and Model XT-1 
Operating Instructions 
November 6 2014 – Revision 2.1 
Page 7 of 77 
Overview 
Safety Information 
Safety Rules 
Read, understand, and follow all safety information contained in these 
instructions prior to installation & operation of the 3M™ Wireless 
Communication System Model XT-1 and the 3M™ Drive Thru Headset G5.  
Failure to follow all instructions listed could result in electrical shock, fire 
and/or other personal injury.  Retain these instructions for future reference. 
Intended Use 
The 3M™ Wireless Communication System Model XT-1 and the 3M™ Drive 
Thru Headset G5 are intended for use to provide 2-way radio-frequency audio 
communication in quick service drive-through restaurants and convenience 
stores. 
The system must be installed as specified in the 3M™ Wireless Communication 
System Model XT-1 Installation Instructions and operated as specified in 3M™ 
Wireless Communication System Model XT-1 Operating Instructions in quick 
service drive-through restaurants and convenience stores.  It has not been 
evaluated for other uses or locations. 
Signal Words 
 
Explanation of Signal Word Consequences 
 WARNING: 
Indicates a potentially hazardous situation, which, if 
not avoided, could result in death or serious injury 
and/or property damage. 
 CAUTION: 
Indicates a potentially hazardous situation which, if 
not avoided, could result in minor or moderate 
injury and/or property damage. 
  NOTICE: 
Indicates a potentially hazardous situation, which, if 
not avoided, may result in property damage. 
 
System Warnings 
 
WARNING 
To reduce the risks associated with hazardous voltage: 
 
Disconnect power to the receptacle before installing or removing the 
Base Station Power Supply.  When removing receptacle cover screw, 
cover may fall across plug pins or receptacle may become displaced.  
Use only with duplex receptacle having center screw.  Secure unit in 
place by receptacle cover screw. 
 
If power supply is supplied with a grounding pin, connect directly to a 
grounding receptacle – 3 prong. 
 
Do not use the XT-1 Base Station or the XT-1 Headset or the G5 
Battery Charger if the power supply cord or enclosure is damaged.