Panasonic SC-XH70 用户手册

RQ

T

9

60

1

≥ When using the HDMI AV OUT terminal, ensure that an incompatible 

video output with the connected TV is not selected. Set the “Video 
Resolution” in Video menu to “480p/576p”. (B 16)

≥ Video images converted to 1920k1080 resolution may look different 

from the true native 1080p full-HD sources. This is not a malfunction of 
the main unit.

≥ Change “TV Aspect” in the Video menu. (B 16)
≥ Use the TV to change the aspect.
≥ Change the zoom setting. (“Zoom” in Menu 2) (B 13)
≥ [JPEG] This is normal during HD JPEG playback. Set “HD JPEG Mode” 

to “Off” if you want to perform zoom function. (B 16)

Restore the zoom ratio to “Normal”. (“Zoom” in Menu 2) (B 13)

[JPEG] This is normal when the display switches to/from HD JPEG 

playback.

≥ The USB drive format or its contents is/are not compatible with the 

system. (B 15)

≥ The USB host function of this product may not work with some USB 

devices.

≥ USB devices with storage capacity of more than 32 GB may not work in 

some instances.

Large file size or high memory USB device takes longer time to read and 
display on the TV.

This problem is caused by the editing method or material used on 
DVD-Video, but should be corrected if you use interlaced output. When 
using the HDMI AV OUT terminal, set “Video Resolution” in Video menu 
to “480i/576i”. Or, disable the HDMI connection and use the other video 
connection. (B 7, 16)

Adjust the position of the FM antenna.

Try to keep a certain amount of distance between the antenna and the TV.

Change the audio to be output as monaural.
Press and hold [PLAY MODE]9 to select “MONO”.

The sound becomes monaural.
≥ To cancel the mode, press and hold the button again until “AUTO ST” is 

displayed. (The mode is also cancelled when you change the 
frequency.)

In normal circumstances, select “AUTO ST”.

The following messages or service numbers may appear on the TV or 
unit's display.

/”

The operation is prohibited by the unit or disc.

/ Incorrect Disc Region”

Only DVD-Video discs that include or have the same region number as 
the one on the rear panel of this unit can be played. (B Cover page)

≥ You inserted a disc the unit cannot play; insert one it can. (B 17)
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalised.

≥ You have not inserted a disc; insert one.
≥ You have not inserted the disc correctly; insert it correctly. (B 11)

The USB device is drawing too much power. Switch to “DVD/CD” mode, 
remove the USB and turn the unit off.

Check and correct the speaker cable connections. If this does not fix the 
problem, consult the dealer. (B 6)

There is a power supply problem. Consult the dealer.

Disc may be dirty. Wipe it clean.

“SET OK” is displayed when the stations are set, and the radio tunes to 
the last preset station.

≥ Incorrect operation performed. Read the instructions and try again.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. 

Preset the stations manually.

Displayed when receiving stereo broadcasting.

Displayed when receiving monaural broadcasting or monaural sound is 
selected.

“DVD H∑∑”
“DVD F∑∑∑”

∑ stands for a number.
≥ Trouble may have occurred. The numbers following “H” and “F” depend 

on the status of the unit. Turn the unit off and then back on. 
Alternatively, turn the unit off, disconnect the AC mains lead, and then 
reconnect it.

≥ If the service numbers fail to clear, note the service number and contact 

a qualified service person.

“U70∑”

∑ stands for a number. (The actual number following “U70” will depend on 

the state of the main unit.)
≥ The HDMI connection acts unusually.

– The connected equipment is not HDMI-compatible.
– Use the High Speed HDMI Cables.
– The HDMI cable is too long.
– The HDMI cable is damaged.

Match the modes on the main unit and remote control. Depending on the 
number being displayed (“1” or “2”), press and hold [OK]8 and the 

corresponding numbered button ([1] or [2]) for at least 2 seconds. (B 4)

Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby 
Laboratories.

This item incorporates copy protection technology that is protected by 
U.S. patents and other intellectual property rights of Rovi Corporation. 
Reverse engineering and disassembly are prohibited.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC in the 
United States and other countries.

HDAVI Control

TM

 is a trademark of Panasonic Corporation.

“DVD Logo” is a trademark of DVD Format/Logo Licensing 
Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS 
and Thomson.

SC-XH70 GS_RQT9601-B_eng.book  Page 20  Wednesday, January 4, 2012  4:10 PM