Motorola 6809496A47-A 产品宣传页

Note: The remote control functions only 
work when the headphones are directly 
connected to source device. via Bluetooth.

Your headphones are designed to be worn 
comfortably with the neck band positioned 
behind your head.

The microphone is located in the right ear-piece. 
Digital Signal processing is used for clear pick-
up of your voice during voice calls.

Call Button

Indicator

Volume
Buttons

To adjust the volume, press the 

+ or 

- buttons on the left side of your 
headphones.

To Skip Back to the previous song: Press 
the Skip Reverse Button 

< on the right 

side of your headset.
To Skip forward to the next song: Press the 
Skip Forward Button 

> 

To Play, Pause, or Stop music: Press the 
Music Button 

M to play, pause, or stop the 

music.
To connect non-Bluetooth Devices to your 
headphones: Use the headphone jack and 
the included cable.

MOTOROLA and the Stylized M Logo are registered in the US 

Patent & Trademark Office. The Bluetooth trademarks are 

owned by their proprietor and used by Motorola, Inc. under 

license. All other product or service names are the property of 

their respective owners.  © Motorola, Inc. 2005.

Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196 USA

Before using your HT820 for the first time, 
charge the headphones for 2 hours:

Plug the Motorola charger into the 
headphones. The indicator light turns on 
when the battery is charging. When the 
headphones' battery is fully charged, the 
indicator light turns off. 

Disconnect the charger.

Charger

Insert Charger

Here

Music Button 

Indicator

Light  

(Right Side)

Before you can use your headphones with a 
Bluetooth enabled product, you must pair it 
with that product. To pair:

Call Button with

Indicator Light

(Left Side)

Next, put your Bluetooth Enabled audio 
device in pairing mode so the devices can 
"talk" to each other.  

For details about putting Bluetooth 
Enabled devices in pairing mode, refer to 
the device's User's Guide for directions.

You can also use a Motorola Original™ 
Vehicle Power Adapter to charge your 
headphones while in your vehicle. 

Make sure your headphones are turned off 
(see Turning On and Off ) and press and 
hold the left side Call

 

m

 

button for 6 

seconds until the indicator light turns on and 
remains steadily lit. 

To turn your headphones on, press and hold 
the left side Call 

m

 

button until the indicator 

light flashes 3 times (about 3 seconds). Then, 
release the button. 

To turn your headphones off, press and hold 
the left side Call 

m

 

button  until the indicator 

light flashes rapidly and then turns off (about 3 
seconds).

To conserve battery power, turn off the 
headphones when you will not be using it.

A fully charged battery provides 
approximately: 14 hrs of music listening, 17 
hrs of talk time, or 500 hrs of standby time.

- Charge your Headphones for 2 Hours (CHARGE)
- Pair headphones & audio device (PAIR)
- Pair phone & headphones (back side of this guide)
- Listen to music and take calls!
 

6809496A47-A

After successfully pairing, you do not need to 
repeat these initial setup steps each time you 
use the headphones.  Just power on both 
devices and they automatically connect.

To confirm they are operating properly:

Place the headphones on your head. See 
Wear the Headphones in this guide.

Start playing music on the audio device. If 
your headphones are successfully paired, 
you will hear music in the headphones. 

See Music Controls for information about 
using the HT820 volume and playback 
controls.

Your headphones are successfully paired  
with a device and ready to use when the 
blue indicator lights changes from steadily lit, 
flashes rapidly, and then slowly flashes.

o

You can use your HT820 headphones 
simultaneously with a Bluetooth A2DP 
enabled audio device and your Bluetooth cell 
phones!  
Listen to music, hear a beep, and transfer to 
take the call on the headphones. Hang up  the 
call with a push of a button and your music 
automically continues playing.

Pair the headphones to the music device 
(PAIR). Then pair the headset with your 
phone (backside of guide).  Power your 
headphones off and then back on.  After a 
few moments it will connect with both the 
music device and phone.

Skip Reverse

Skip Forward 

 Music Button

 

 Headphone 

Jack

Are you having sound interruption or 
connection issues? 

Bluetooth as a wireless technology could 
be subject to interference of other 
wireless traffic existing in your 
environment.  Try turning your headphone 
off and back on.  This automatically resets 
the connection.

If you experience audio interruptions while 
the headphone is connected to both 
music source and a Bluetooth phone, 
disconnecting the phone will eliminate the 
audio interruptions.  

 

o