Motorola 6809494A40-O 用户手册
10
Battery
Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain
internal rechargeable batteries must be in accordance with local environmental regulations.
internal rechargeable batteries must be in accordance with local environmental regulations.
Temperature
• Do not store or use RAZRWIRE in temperatures lower than -20°C / -4°F or higher
than 50°C / 122°F.
• Do not recharge RAZRWIRE in temperatures lower than 0°C / 32°F or higher
than 40°C / 104°F.
• Conditions inside a parked car can exceed this temperature range. Do not store
RAZRWIRE in a parked car.
• Do not store RAZRWIRE in direct sunlight.
• Storing RAZRWIRE fully charged in high temperature conditions may permanently
• Storing RAZRWIRE fully charged in high temperature conditions may permanently
reduce the life of the internal battery.
• Battery life may temporarily shorten in low-temperature conditions.
Shockwave
Do not expose RAZRWIRE to excessive force or impact. Be careful not to drop RAZRWIRE.
Charger
Do not force the charging cable connector into the module port. If the connector won't go into the
port, try flipping the connector 180 degrees. Do not attempt to charge RAZRWIRE with any charger
other than the one designed by Oakley specifically to be used with this product.
port, try flipping the connector 180 degrees. Do not attempt to charge RAZRWIRE with any charger
other than the one designed by Oakley specifically to be used with this product.
Cleaning
To clean the lenses, use the Microclear™ bag that is included with RAZRWIRE, or use a soft cotton
cloth. First, gently brush the cloth across all lens surfaces to remove any grit or particles that might
scratch the lens. Next, gently rub the lenses between the folds of the cloth. When necessary, hand
wash and air-dry the Microclear bag.
cloth. First, gently brush the cloth across all lens surfaces to remove any grit or particles that might
scratch the lens. Next, gently rub the lenses between the folds of the cloth. When necessary, hand
wash and air-dry the Microclear bag.
When cleaning RAZRWIRE, please note the following:
• The transceiver module is not waterproof, and moisture may damage the electronic
circuitry. Do not rinse or immerse any part of the module. Keep the module dry at all times.
• Before cleaning, make sure RAZRWIRE is unplugged from the wall charger.
• Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive
• Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive
cleaning compounds or solvents. These substances may damage the lens coatings or leak
into the module and damage the electronic circuitry.
into the module and damage the electronic circuitry.
• Should a lens become scratched, have it replaced immediately to ensure your vision is not
compromised.