Sony CDX-HR905IP 用户手册
16
Tip
Other equalizer types are also adjustable.
Other equalizer types are also adjustable.
Adjusting setup items — SET
1
Press and hold (SELECT).
The setup display appears.
The setup display appears.
2
Press (SELECT) repeatedly until the
desired item appears.
desired item appears.
3
Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
select the setting (example “ON” or
“OFF”).
4
Press and hold (SELECT).
The setup is complete and the display returns
to normal play/reception mode.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
CLOCK-ADJ (Clock Adjust) (page 7)
CT*
1
(Clock Time)
To set “CT-ON” or “CT-OFF” (
z
) (page 12, 13).
BEEP
To set “BEEP-ON” (
z
) or “BEEP-OFF.”
AUX-A*
2
(AUX Audio)
To turn the AUX source display “AUX-A-ON”
(
(
z
) or “AUX-A-OFF” (page 18).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off: “A.OFF-NO” (
when the unit is turned off: “A.OFF-NO” (
z
),
“A.OFF-30S (Seconds),” “A.OFF-30M
(Minutes)” or “A.OFF-60M (Minutes).”
(Minutes)” or “A.OFF-60M (Minutes).”
REAR/SUB*
2
To switch the audio output.
– “REAR-OUT” (
– “REAR-OUT” (
z
): to output to a power
amplifier.
– “SUB-OUT”: to output to a subwoofer.
DEMO (Demonstration)
To set “DEMO-ON” (
z
) or “DEMO-OFF.”
DIM (Dimmer)
To change the brightness of the display.
– “DIM-AT” (
– “DIM-AT” (
z
): to dim the display
automatically when you turn lights on.
– “DIM-OFF”: to deactivate the dimmer.
– “DIM-ON”: to dim the display.
– “DIM-ON”: to dim the display.
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.
The contrast level is adjustable in 7 steps.
ILM (Illumination)
To change the illumination color: “ILM-1” (
z
)
or “ILM-2.”
M.DSPL (Motion Display)
To select the Motion Display mode.
– “M.DSPL-LM” (
– “M.DSPL-LM” (
z
): to show moving patterns
and level meter.
– “M.DSPL-OFF”: to deactivate the Motion
Display.
– “M.DSPL-ON”: to show moving patterns.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– “A.SCRL-ON” (
when the disc/album/group/track is changed.
– “A.SCRL-ON” (
z
): to scroll.
– “A.SCRL-OFF”: to not scroll.
LOCAL (Local seek mode)
– “LOCAL-OFF” (
z
): to tune normal reception.
– “LOCAL-ON” : to only tune into stations with
stronger signals.
MONO*
3
(Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– “MONO-OFF” (
reception mode.
– “MONO-OFF” (
z
): to hear stereo broadcast in
stereo.
– “MONO-ON”: to hear stereo broadcast in
monaural.
REG*
1
*
3
(Regional)
To set “REG-ON” (
z
) or “REG-OFF” (page 13).
LPF*
4
(Low Pass Filter)
To select the subwoofer cut-off frequency: “LPF
OFF” (
OFF” (
z
), “LPF125Hz” or “LPF 78Hz.”
LOUD (Loudness)
To allow you to listen clearly at low volume
levels.
– “LOUD-ON” : to reinforce bass and treble.
– “LOUD-OFF” (
levels.
– “LOUD-ON” : to reinforce bass and treble.
– “LOUD-OFF” (
z
): to not reinforce bass and
treble.
BTM (page 11)
*1 CDX-HR905IP only.
*2 When the unit is turned off.
*3 When FM is received.
*4 When the audio output is set to “SUB.”
*2 When the unit is turned off.
*3 When FM is received.
*4 When the audio output is set to “SUB.”