Panasonic SC-PM313 用户手册

下载
页码 16
12
RQT7923
Setting the clock
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚
 PLAY
Original display
˚
 REC
2
Within 5 seconds, press [4/REW/ 4] or 
[
3/FF/¢] to set the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds. 
• The clock may lose or gain some time over a period. Readjust if 
necessary.
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically 
after the set time.
Press [SLEEP] to select your desired time. 
SLEEP 30
SLEEP 60
SLEEP 90
SLEEP 120
SLEEP OFF
Sleep timer indicator
To cancel
Press [SLEEP] to select “SLEEP OFF”.
Changing the remaining time
Press [SLEEP] to show the time and press [SLEEP] again to 
select your desired time.
•  The play and sleep timer or the record and sleep timer can be used 
together.
• The sleep timer always has priority. Be sure not to overlap timer 
settings.
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake 
you up (play timer) or to record from the radio or an aux 
source (record timer).
Turn the unit on and set the clock.
Timer
Action
Play timer
Prepare the music source you want to listen to; 
tape, CD number (1~5), radio or AUX, and set the 
volume.
Record timer
Check the cassette’s erasure prevention tabs 
(refer page 10), insert the cassette and tune to 
the radio station (refer page 11) or select the aux 
source (refer page 13).
1
Press [CLOCK/TIMER] to select your desired timer.
Each time you press the button:
CLOCK
˚
 PLAY
Original display
˚
 REC
2
Within 5 seconds, press [4/REW/ 4] or [3/FF/¢
to set the starting time.
Play timer indicator
Start time
Record timer indicator
3
Press [CLOCK/TIMER] to confirm.
4
Repeat steps 2 to 3 to set the fi nishing time.
Finish time
To activate the timer
5
Press [˚PLAY/REC] to turn on your desired timer.
˚
 PLAY
no display (off)
˚
 REC
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
To enjoy the desired source after the timer setting is 
completed.
The volume level (for play timer) and music source are stored 
in the timer memory and the timer will start in these preset 
conditions. However, the CD numbers do not get stored in 
the timer memory.
1. After step 5, start playing the desired source.
2. Reset the CD numbers if you have changed any of them, 
confi rm that a CD or cassette is inserted, then press [y] to 
put the unit on standby.
Other basic operations
Other basic operations
To
Action
change the settings
Repeat steps 1 to 4 and 6 above. 
change the source 
or volume
1) Press [˚PLAY/REC] to clear the timer 
indicator from the display.
2)  Make changes to the source or 
volume.
3)  Do steps 5 to 6 as above.
check the settings 
(when the unit is on 
or in standby mode)
Press [CLOCK/TIMER] repeatedly to 
select ˚PLAY or ˚REC.
cancel 
Press [˚PLAY/REC] to clear the timer 
indicators from the display.
Timer
PM31_7923-3P.indd   12
PM31_7923-3P.indd   12
2/18/05   3:25:23 PM
2/18/05   3:25:23 PM