Panasonic SJ-MR240 用户手册

RQT7177

主
な
仕
様
／

1

2

Recharging begins.

“CHARGE” appears on the display while
recharging and “CHARGE” disappears
when the battery is fully charged. It takes
approximately 3.5 hours to recharge the
supplied battery.

1

Slide [OPEN 1] in the direction of
the arrow to open the lid. 

2

3

Slide [OPEN 1] in the direction of the
arrow to remove the disc. The disc
springs out from the unit.

≥

Release HOLD.

≥

Connect this unit to a unit that has a
digital output terminal or stereo LINE
OUT terminals, or the microphone.

≥

Insert the rechargeable battery into the
unit.

≥

Insert a recordable MD.

1

➞, LP MODE] (main

unit) to the right or press and hold
[T.MARK/EQ, %REC] (remote con-
trol) until the display changes.
The unit comes on and enters the
recording standby mode.

2

➞, LP MODE]

(main unit) to select the recording
mode.
The mode changes each time you do this.
LP2 (X 2) 

( ------------------------------------]

;

|

LP4 (X 4) 

|

;

|

No display (Normal stereo recording)

--}

3

1 Press [1/;] (main unit) or

2 Begin playback of the source or

∫

Press  [1/∫] (remote control) or 
[∫, OPR OFF/%HOLD] (main unit).

≥

The unit powers itself off automatically
in about a minute.

≥

You can even turn off the unit by press-
ing again [∫, OPR OFF/%HOLD]
(main unit) while stopped.

Main unit 
Preparation : After pressing [1/;],
press [∫, OPR OFF/ % HOLD].
Press and hold [∫, OPR OFF/%HOLD]
until “HOLD ON” displays.

∫

Preparation : Press [1/;].

“HOLD” is displayed.

Press and hold [∫, OPR OFF/%HOLD]
until “HOLD OFF” displays.

≥

Release HOLD.

≥

Insert an MD.

≥

Connect the remote control and stereo
earphones, then insert the remote con-
trol’s plug into the earphone jack [Ë]
on the unit.
∫ To listen through the speakers

1. Insert a rechargeable battery into the

unit.

2. Install the unit to the multi cradle.
3. Connect the AC adaptor to the multi

cradle.

4. Connect the speakers to the multi cra-

dle.

1

Press [1/∫] (remote control) or 
[1/;] (main unit)  to start play.

2

Move [1/∫] (remote control) toward
[r] or [s], or [1/;] (main unit) up
or down to adjust the volume.

∫

Press  [1/∫] (remote control) or 
[∫, OPR OFF/%HOLD] (main unit).

≥

The unit powers itself off automatically
in about a minute.

≥

You can even turn off the unit by press-
ing again [∫, OPR OFF/%HOLD]
(main unit) while stopped.

1

2

Turn the jog dial to select
“DIVIDE?” and press it.
A 4 second segment of the track is
played repeatedly, beginning at the
point selected.

3

Turn the jog dial to adjust the point
you want to divide the track and
press it.
Adjustments can be made approxi-
mately 8 seconds (16 seconds if the
track is monaural or recorded with
LP2, 32 seconds if the track is record-
ed with LP4) either side of the original
point. (-128 to +127)

4

1

2

Turn the jog dial to select “COM-
BINE?” and press it.
While playing, the last 8 seconds of
the former track and the first 8 sec-
onds of the latter track play repeated-
ly.

3

4