Panasonic WJ-HD716K 用户手册

105

Select the [Transmission] tab on the "Network" page. (+ Page 60)
The settings relating to the resolution and rate to transmit live images to a PC via a network can also be configured on this tab. 
     

[Live video resolution]
Select the resolution for live images from the following. 

REC resolution: Live images are transmitted with the 

resolution applied at the time of recording. 

QVGA: Live images are transmitted in the QVGA size. 

Default: REC resolution:

[Live video rate(rec resolution)]
Select the image transmission rate of live images (activated 
when recording is not performed) when "REC resolution" is 
selected for "Live video resolution". During recording, record-
ing rate is activated for live image transmission.
    Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for 

HD716K)

Default: 7.5ips

[Live video quality(rec resolution)]
Select the image quality of live images (activated when 
recording is not performed) when "REC resolution" is select-
ed for "Live video resolution". During recording, recording 
image quality is activated for live image transmission.

XF (Extra Fine): Extra quality
SF (Super Fine): Super high quality
FQ (Fine): High quality
NQ (Normal): Standard quality
EX (Extended): Low quality (for long recording)

Default: FQ

[Live video rate(QVGA)]
Select the transmission bit rate when "QVGA" is selected for 
"Live video resolution".
    128Kbps/192Kbps/256Kbps/384Kbps*/512Kbps*
    * Only for HD716K
Default: 256Kbps

[Bandwidth control]
Select the maximum transmission rate for data to be trans-
mitted from the following.
    Unlimited/512Kbps/1 024Kbps/2Mbps/3Mbps/5Mbps/ 

8Mbps

Default: Unlimited
     

 •  Regardless of the setting for "Live video resolution",

when images are displayed on a multiscreen (4-split/ 
9-split/16-split screen) or with the sequential display, 
"QVGA" is activated for resolution, and the setting for 
"Live video rate (QVGA)" is activated when image is 
transmitted.

 •  When image is displayed on a single screen, the setting

for "Live video resolution" is activated when image is 
transmitted.

 •  The settings for "Live video rate(rec resolution)", "Live

video quality(rec resolution)" and "Live video rate(QVGA)" 
are applied to each screen segment.
Example: When "128Kbps" is selected for "Live video 

rate (QVGA)" while images are being displayed on a 
4-split screen, the whole transmission rate is  
512 Kbps.

 •  Select the setting for "Bandwidth control" so that the

value is greater than the total rate required for network 
transmission. When the setting value is less than the 
total transmission rate, image data may be destroyed 
during transmission.
Example: When "QVGA" is selected for "Live video res-

olution" and "128Kbps" is selected for "Live video 
rate (QVGA)" while 4 PCs displaying a single screen 
are accessing the recorder simultaneously, select the 
value greater than "512Kbps" for "Bandwidth con-
trol". 

    When "REC resolution" is selected for "Live video resolu-

tion", it is recommended to set "Unlimited" for 
"Bandwidth control" to prevent the images from destruc-
tion due to change in transmission rate caused by the 
recording setting. When images are destroyed even 
when "Unlimited" is selected for "Bandwidth control", 
select a lower value for image quality or recording rate.