Panasonic WJ-HD716K 用户手册
27
➜
Operations flow
The operation flow of the recorder is as follows.
Rack mounting
(+ Page 28)
z
➜
Connections
(+ Page 29)
x
➜
Installation of the hard disk drives
(+ Page 52)
c
➜
Determination of the operational mode
(+ Page 54)
v
➜
Startup
(+ Page 55)
b
➜
Configuration of the settings for the
quick setup.
(+ Page 63)
n
z
Install the recorder in the rack.
Go to step x when not installing it in the rack.
x
Connect the recorder to each device.
When using an optional extension unit, install hard disk
drives in the optional extension unit (WJ-HDE400) and
connect to the recorder. (+ Page 33)
connect to the recorder. (+ Page 33)
c
Install hard disk drives in the recorder.
When using an optional RAID board (WJ-HDB601) or an
optional DVD drive (WJ-HDB611), install it.
v
Reboot the recorder after determining the operational
mode if necessary such when using the RAID function.
When not installing an optional RAID board
(WJ-HDB601), go to step 5.
b
Turn on the power of the recorder.
When using optional extension units (WJ-HDE400), turn
the power of all the extension units before turning on the
power of the recorder.
power of the recorder.
n
Configure the settings such as the current time and date
setting, schedule recording settings, etc.
➜
Configuration of the recording area
setting of the hard disk drives.
(+
Page 126)
m
m Change the recording area setting or format the record-
ing area of the hard disk drive if necessary such when it
is necessary to assign the event recording area to the
hard disk drive.
is necessary to assign the event recording area to the
hard disk drive.
➜
Setup
(+ Page 57)
,
,
Configure the settings required for operation.
➜
Start operation
Replacement/addition of hard disk
drives
(+ Page 133)
.
The hard disk drives can be formatted/replaced without turn-
ing off the power of the recorder even when one of them
becomes faulty.
ing off the power of the recorder even when one of them
becomes faulty.
When necessary