Panasonic WJ-HD716K 用户手册
91
[4-screen live sequence]
Configure the settings for the sequential display when dis-
playing images with the sequential display on a 4-split
screen.
When the [Setup] button is selected, the following setup
page will be displayed to configure each setting item.
Configure the settings for the sequential display when dis-
playing images with the sequential display on a 4-split
screen.
When the [Setup] button is selected, the following setup
page will be displayed to configure each setting item.
• [Cam.]
Select a camera image to be displayed at each step
Select a camera image to be displayed at each step
from the following.
--: Skips the selected step.
Quad1 - 4: Displays images from camera channels 1 - 4
Quad1 - 4: Displays images from camera channels 1 - 4
on a 4-split screen.
Quad5 - 8: Displays images from camera channels 5 - 8
on a 4-split screen.
Quad9 - 12: Displays images from camera channels 9 -
12 on a 4-split screen.
Quad13 - 16: Displays images from camera channels
13 - 16 on a 4-split screen.
• [Dwell time]
Select an interval time to go to the next sequential step.
2s/3s/5s/10s/20s
Select an interval time to go to the next sequential step.
2s/3s/5s/10s/20s
• [Back] button
Closes the setup page for 4-screen live sequence and
Closes the setup page for 4-screen live sequence and
returns to the [Network] tab.
Note:
• Depending on the network traffic, the sequential display
may not work exactly with the set interval time for [Dwell
time].
time].
Configure the settings relating to the cascade connection [Cascade]
Select the [Cascade] tab on the "Display" page. (+ Page 60)
The settings relating to the cascade connection to use two or more recorders can be configured on this tab.
The settings relating to the cascade connection to use two or more recorders can be configured on this tab.
[Cascade]
Select "On" or "Off" to determine whether to enable or dis-
able the cascade connection to use two or more recorders.
Select "On" when using two or more recorders for the cas-
cade connection.
Select "On" or "Off" to determine whether to enable or dis-
able the cascade connection to use two or more recorders.
Select "On" when using two or more recorders for the cas-
cade connection.
Note:
When "On" is selected for "Cascade", the time of the
recorders whose "Unit address (system)" (+ page 93) is
set to "002" to "004" are periodically adjusted to that of
the recorder whose "Unit address (system)" is set to
"001". (Cascade time adjustment)
set to "002" to "004" are periodically adjusted to that of
the recorder whose "Unit address (system)" is set to
"001". (Cascade time adjustment)
However, when "On" is set for "Time adjustment"
(+ page 95), the time will be adjusted according to the
NTP server.
NTP server.
[Cascade sequence]
Select "On" or "Off" to determine whether or not to perform
the sequential display when the recorders are connected in
the cascade connection.
It is possible to perform the sequential display in the order of
cascade connection of the recorders.
Select "On" or "Off" to determine whether or not to perform
the sequential display when the recorders are connected in
the cascade connection.
It is possible to perform the sequential display in the order of
cascade connection of the recorders.