Panasonic CQ-DP101W 用户手册

23

22

<

MONO: Noise is significantly decreased when

weak signals are received from an FM
broadcast station.

LOCAL: Only strong signals of stations are

searched in seek tuning, while at the
LOCAL OFF setting, relatively weak sig-
nals are also searched.

FM broadcast: 
Press [

] (MONO/LOC) to change the mode. 

Release when at the desired mode.
AM broadcast: 
Press [

] (MONO/LOC) to switch LOCAL mode

on and off.

Press  [SOURCE] to change to
the radio mode.

<

Up to 6 stations each can be saved in the FM1,
FM2, FM3 and AM preset station memories.

Note: 
≥

You can change the memory presetting by repeating
the above procedure.

Caution:
≥

To ensure safety, never attempt to preset sta-
tions while you are driving.

(When a CD is inserted.)

FM stereo indicator

Preset number

Press and hold ...
[

$ TUNE]: Higher frequency

% TUNE]: Lower frequency

Tuning will automatically stop when the signals
of the next broadcast station are received.

1 Use manual or seek tuning to find a station.

(

➡

page 22)

2 Press and hold one of the preset buttons [1]

to [6] until the display blinks once.

1

4

Press the corresponding preset button [1] to [6]
to tune in a preset station.

3

Press [BAND] to change the band.

2

$ TUNE]: Higher frequency

% TUNE]: Lower frequency

3

MONO OFF/
LOCAL OFF

MONO ON/
LOCAL OFF

MONO OFF/
LOCAL ON

MONO ON/
LOCAL ON

LOCAL OFF

LOCAL ON

Press [BAND] to select a desired band.
(

➡

page 22)

1

Press and hold [BAND] (APM) for more than 
2 seconds (auto preset memory).
≥

The 6 strongest available stations will be auto-
matically saved in the memory under preset
buttons [1] to [6].

≥

Once set, the preset stations are sequentially
scanned for 5 seconds each.

Note:
≥

The stations manually preset on the selected
band will be deleted.

2