Rotel RCD-06 用户手册

Rotel products are designed to comply with international directives

on the Restriction of Hazardous Substances (RoHS) in electrical

and electronic equipment and the disposal of Waste Electrical and

Electronic Equipment (WEEE). The crossed wheelie bin symbol

indicates compliance and that the products must be appropriately

recycled or processed in accordance with these directives.

RCD-06 Stereo Compact Disc Player

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Refer all

servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, be sure that

the apparatus shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases, shall be placed on

the apparatus.
Do not allow foreign objects to get into the enclosure. If the unit is

exposed to moisture, or a foreign object gets into the enclosure, im-

mediately disconnect the power cord from the wall. Take the unit to

a qualified service person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep

this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product

itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
You must allow 10 cm or 4 inches of unobstructed clearance

around the unit. Do not place the unit on a bed, sofa, rug, or similar surface

that could block the ventilation slots. If the component is placed in a bookcase or

cabinet, there must be ventilation of the cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other

appliance that produces heat.
The unit must be connected to a power supply only of the type and voltage

specified on the rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply

cable or an exact equivalent. Do not modify the supplied cable in any way. Do

not attempt to defeat grounding and/or polarization provisions. Do not use

extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe

angles, exposed to heat, or damaged in any way. Pay particular attention to the

power cord at the plug and where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left

unused for a long period of time.
Immediately stop using the component and have it inspected and/or serviced

by a qualified service agency if:
•  The power supply cord or plug has been damaged.
•  Objects have fallen or liquid has been spilled into the unit.
•  The unit has been exposed to rain.
•  The unit shows signs of improper operation
•  The unit has been dropped or damaged in any way
Please  use  Class  2  Wiring  when  connecting  the  speaker  terminals  of

the unit to ensure proper insulation and minimize the risk of electrical shock.

IMPORTANT

FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation

when open and interlock failed or bypassed.

Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There

are no user serviceable parts inside the

player; leave all servicing to qualified service

personnel.
WARNING!

To reduce the risk of electrical shock, fires,

etc.:
1. Do not remove screws,

covers or cabinet.
2. Do not expose the unit to rain

or moisture.
3. Do not touch the power cord

or plug with wet hands.

This symbol means that this unit is double insu-

lated. An earth connection is not required.

Place the unit on a fixed, level surface strong

enough to support its weight. Do not place it

on a moveable cart that could tip over.