Roland CD-2i 用户手册
USING THE UNIT SAFELY
(continued)
10
111: Selection
●
If used improperly, batteries may explode or leak
and cause damage or injury. In the interest of
safety, please read and observe the following
precautions (p. 23).
and cause damage or injury. In the interest of
safety, please read and observe the following
precautions (p. 23).
1
❍
Carefully follow the installation instructions for
batteries, and make sure you observe the
correct polarity.
batteries, and make sure you observe the
correct polarity.
2
❍
Avoid using new batteries together with used
ones. In addition, avoid mixing different types
of batteries.
ones. In addition, avoid mixing different types
of batteries.
3
❍
Remove the batteries whenever the unit is to
remain unused for an extended period of time.
remain unused for an extended period of time.
5
❍
If a battery has leaked, use a soft piece of cloth
or paper towel to wipe all remnants of the
discharge from the battery compartment. Then
install new batteries. To avoid inflammation of
the skin, make sure that none of the battery
discharge gets onto your hands or skin.
Exercise the utmost caution so that none of the
discharge gets near your eyes. Immediately
rinse the affected area with running water if
any of the discharge has entered the eyes.
or paper towel to wipe all remnants of the
discharge from the battery compartment. Then
install new batteries. To avoid inflammation of
the skin, make sure that none of the battery
discharge gets onto your hands or skin.
Exercise the utmost caution so that none of the
discharge gets near your eyes. Immediately
rinse the affected area with running water if
any of the discharge has entered the eyes.
6
❍
Never keep batteries together with metallic
objects such as ballpoint pens, necklaces,
hairpins, etc.
objects such as ballpoint pens, necklaces,
hairpins, etc.
....................................................................................
112
●
Used batteries must be disposed of in compliance
with whatever regulations for their safe disposal
that may be observed in the region in which you
live.
with whatever regulations for their safe disposal
that may be observed in the region in which you
live.
....................................................................................
113
●
Use only the specified type (model no. CR2025) of
lithium battery (p. 30). Be sure to insert it as
directed (to ensure correct polarity).
lithium battery (p. 30). Be sure to insert it as
directed (to ensure correct polarity).
....................................................................................
114
●
Used lithium batteries must be disposed of in
compliance with whatever regulations for their
safe disposal that may be observed in the region
in which you live.
compliance with whatever regulations for their
safe disposal that may be observed in the region
in which you live.
....................................................................................
118c
●
Keep ground terminal screw, lithium batteries for
the remote, the battery cover, and attachment
screw for SD memory card protector you may
remove and the included
the remote, the battery cover, and attachment
screw for SD memory card protector you may
remove and the included
SD memory card, and
SD memory card protector in a safe place out
of children’s reach, so there is no chance of them
being swallowed accidentally.
of children’s reach, so there is no chance of them
being swallowed accidentally.
....................................................................................
120
●
Always turn the phantom power off when
connecting any device other than condenser
microphones that require phantom power. You
risk causing damage if you mistakenly supply
phantom power to dynamic microphones, audio
playback devices, or other devices that don’t
require such power. Be sure to check the specifi-
cations of any microphone you intend to use by
referring to the manual that came with it.
connecting any device other than condenser
microphones that require phantom power. You
risk causing damage if you mistakenly supply
phantom power to dynamic microphones, audio
playback devices, or other devices that don’t
require such power. Be sure to check the specifi-
cations of any microphone you intend to use by
referring to the manual that came with it.
(This instrument’s phantom power: 48 V DC, 10
mA Max)
mA Max)
...................................................................................
CD-2i_e.book 10 ページ ２０１０年３月１５日 月曜日 午前１０時１５分