Roland 5100013104-02 用户手册
Troubleshooting
(continued)
129
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
Problems with the Sound
Problem
Cause and Action
See
Page
No sound
●
Could the connections be incorrect?
➔
Make the correct connections.
●
Could the power on the connected equipment (mic, digital piano, etc.)
be switched off?
be switched off?
➔
Turn on the power.
—
●
Could the volume of the connected device be turned down?
➔
Raise the volume of the connected device.
—
●
Could headphones be plugged in?
➔
Unplug the headphones.
—
●
Is the volume set to the minimum?
➔
Use the [VOLUME] knob to raise the volume.
●
Could the speakers be muted (turned off)?
➔
Press the [Speaker] button so they’re turned on.
●
Could the [
](Record) button be blinking or lit?
➔
In recording-standby mode or while recording, there will be no sound
from the speakers. Use headphones if you want to monitor the sound
during recording.
from the speakers. Use headphones if you want to monitor the sound
during recording.
—
The input source (audio
source) is not output
source) is not output
●
Could the input level be turned down?
➔
If you’ve connected external mics, turn the [MIC] knob to raise the input
level.
level.
➔
If you’re inputting audio via the LINE/PHONO IN jacks, turn the [LINE/
PHONO] knob to raise the input level.
PHONO] knob to raise the input level.
●
Could MIC SELECT be set to “Internal
”
?
➔
The sound from the internal mics won’t be heard from the speakers. Use
headphones if you want to monitor the sound of the internal mics.
headphones if you want to monitor the sound of the internal mics.
●
Could MIC SELECT be set incorrectly?
➔
If you want to record using the internal mics, set to “INT.”
➔
If you want to use external mics for your recording, set to “EXT.”
Insufficient volume from
a device connected to
the EXT MIC
a device connected to
the EXT MIC
(L/MONO, R)
/LINE/PHONO IN jacks
●
Could you be using a connection cable that contains an internal
resistor?
resistor?
➔
Use a connection cable—such as one from the Roland PCS series— that
does not contain an internal resistor.
does not contain an internal resistor.
—
●
Could the external mic’s sensitivity be set to “Low”?
➔
If the sound from the external mic is still not loud enough even after
you’ve adjusted the input level, set the “EXT MIC Sens” to “High.”
you’ve adjusted the input level, set the “EXT MIC Sens” to “High.”
CD-2i_e.book 129 ページ ２０１０年３月１５日 月曜日 午前１０時１５分