Roland 5100013104-02 用户手册

下载
页码 144
 
72
 
Listening to a CD/Listening to an SD Memory Card
 
* In order to play a CD, you’ll need to use the dedicated AC adaptor, which was included with the CD-2i.
 
 
4
 
Press the [
](Play) button to start playback.
 
5
 
Turn the [VOLUME] knob to adjust the volume.
Listening to a CD
Listening to an SD memory Card
 
1
 
Turn on the power 
 
(
 
 
 
1
 
Turn on the power 
 
(
 
 
 
.
 
2
 
Insert the CD 
 
(
 
 
 
2
 
Insert the SD memory card
 
(
 
 
 
3
 
Set the audio source to “CD.”
 
Press the [CD] button so it’s lit.
 
fig.selectCD-e.eps
 
3
 
Set the audio source to “SD.”
 
Press the [SD CARD] button so it’s lit.
 
fig.selectSD-e.eps
 
To do this
Perform this action
 
Stop playback
Press the [
](Stop) button.
 
If you press this button while stopped, you will return to the first track.
 
Pause playback
Press the [
](Play) button.
 
Press it once again to resume playback from the point at which you 
paused.
 
Go to the beginning 
of a track (Skip)
Press the [
] button.
 
Each time you press this button, you go back by one track. If you press 
this button during playback, you will return to the beginning of the 
track that was playing.
 
Press the [
] button.
 
Each time you press this button, you advance to the next track.
 
Skip between songs at 
high-speed
While stopped, press and hold the [
] or [
] button.
Rewind/
fast-forward (Search)
During playback, press and hold.
 
[
] button: Rewind.
[
] button: Fast-forward.
 
High-speed rewind/
fast-forward
While paused, press and hold the [
] or [
] button.
Currently playing 
track number
Source name
Elapsed playback time
Softer
Louder
If you don’t need the mic or LINE/PHONO input, you 
should turn down the input level to the minimum 
position.
Mic input Set the [MIC LEVEL] switch to the 
“MANUAL” position, and turn the [MIC] knob all the 
way to the left (off).
LINE/PHONO input  Turn the [LINE/PHONO] knob 
all the way to the left (off).
CD-2i_e.book 72 ページ 2010年3月15日 月曜日 午前10時15分