Lenoxx Electronics CD-160 用户手册

CD TROUBLE SHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE AND REMEDY

CD does not rotate

Is AC Power Cord plugged into outlet? Does outlet

have power? Check outlet with a lamp or other

appliance.

Make sure the CD Indicator is ON.

If using the set on batteries - make sure you

unplug the AC Cord from the back of set and outlet.

- Also check if batteries are fresh.

(The AC Socket in the back of set has a switch

which shuts off battery power if cord is plugged

into back of set).

CD does not play

If the Display shows (flashing). This means

the CD disc is upside down or missing. Open the

door, remove the CD, flip it over and insert correctly.

The printed side facing up.

1.Is the lens very dirty? (Gently clean the lens with

a soft cloth or CD cleaner disc available at most

Hi-Fi stores.)

2.Is the Power/Batt. Indicator Lamp ON?

3.Is the CD Indicator ON?

4.Is the played time flashing? (press the PlayButton)

The played time will flash in pause and be steady

on during play.

Disc skips parts of

songs

The disc is defected. Try cleaning the disc with a

clean rag or disc cleaner. If this does not help,

the disc may be damaged.

Is the lens very dirty? Gently clean the lens.

Speakers have no

sound

1. Are the speakers plugged in? Check the back of

the set and see page 6.

2. Is Volume Control at MIN? Adjust the Volume Control.

3. Is headphone in jack? Remove headphones.

4. Make sure AC Power Cord is plugged in or

unplugged from back of set if using batteries.

5. Make sure batteries are fresh.

N O T E :

N O T E : The CD player and the cassette decks are fitted with self-lubricating bearings

which must not be oiled or greased.

TTTTTO CLEAN THE CD PLA

O CLEAN THE CD PLA

O CLEAN THE CD PLAYER

YER

A chamois soft cloth very slightly moistened with water is sufficient for cleaning the

housing of the set and the enclosures.

N O T E :

N O T E : Your CD player may not play when bringing it from a cold place (outdoors)

to a warm place (indoors). Because of large temperature differences,

condensation may have formed on the lens of the laser. This will disappear

after some time (when the mechanism warms up).

CD-160S050699 V.2 E