Lenoxx Electronics CD203 用户手册

IB-CD203(AD)-WM-E-012503

TROUBLE SHOOTING

Problem

Remedy

The power is not on.

There is no sound.

Make sure the FUNCTION switch is at the right

position as you want.

Adjust the volume.

Unplug the headphones when listening
through speakers.

appears in the display even

when a CD is in place.

Insert the CD with the label side up.

CD does not play.

The sound is weak or has poor

quality.

Make sure the safety tab on the cassette is
in place.

Make sure the FUNCTION switch is at TAPE

position.

Clean the erasing head.

Replace all the batteries with new ones if they are

weak.

The tape does not record.

The sound is weak/The sound

quality is poor.

The sound drops out.

Cassette PLAY button pops up.

The tape has reached its end. Remove it, flip to the
other side and re-insert.

CD does not play while radio may

continue to play.

•

It is normal since the radio uses less power than the

CD player.

Tape jamming or tangling.

Use only better quality tapes.

Do not use a cassette with more than 90 minutes.

Make sure there are no loose layers of tape visible

before inserting the cassette.

The tape does not erase
completely.

Clean the heads, pinch roller and capstan.

Insert the AC plug into a wall outlet securely.

Make sure the batteries are installed correctly and
they are fresh.

Make sure that the CD compartment is closed.

Clean the CD.

Take out the CD and leave the CD DOOR open for
about an hour to dry moisture condensation.

Make sure the FUNCTION switch is at CD

position.

Clean the CD, or replace it if the CD is badly
damaged.

Place the player in a location free from vibration.

Check if your batteries are fresh.

General

CD player

Replace all the batteries with new ones if they are

weak, or bring the set near a window, or rotate the
set.

Radio

The RECORD button does not

function/The tape does not play.

Tape player

Make sure the tape is inserted properly.

Make sure the safety tab of the cassette is in place.