Marantz CD5003 用户手册

ENGLISH

The following functions can be selected and set.
During stop, press the MENU button on the remote 
controller. Press the 

7 or 8 button on the remote 

controller to select the desired item.

7

7

7

7

8

8

8

7

8

8

If digital output is not to be used, turn digital output 
OFF, and you can enjoy higher-quality sound.

7 Setting digital output ON or OFF

  During stop, press the MENU button on the 

remote controller once then the 

7 button three 

times. “Digital Out” appears.

  Press the ENTER button on the remote 

controller.

 

The current settings appear on the display.

 

(At the factory, digital output is set to ON.)

 Press the 

¢/4 buttons to switch digital 

output ON or OFF.

  Press the ENTER button after making a 

setting.

 

Normal display is resumed.

For higher-quality sound, select the Audio EX setting, referring the table below.
Audio EX changes as shown below each time the SOUND MODE button on the remote controller is pressed 
during stop.

Audio EX OFF:
A digital signal is output only when 
the pitch control setting is 0.

Usable

Yes (*1)
(when the pitch 
control setting is 
0)

Yes

Audio EX 1:
When first purchased.
Audio EX 1 offers better sound.

Not usable

Yes (*1)

Yes

Audio EX 2:
Audio EX 2 offers best sound from 
analog outputs.

Not usable

No

No (during play) 
(*2)

(*1) Setting of Digital Out on the MENU (page 24) takes priority.
(*2) Pressing the DISPLAY button on the remote controller shows the display for three seconds.

CD5003_U_01_ENG.indd   24

CD5003_U_01_ENG.indd   24

08.6.19   8:22:11 AM

08.6.19   8:22:11 AM