American Standard 621.001 产品宣传页
VANITY INSTALLATION
2
7 3 0 1 2 4 4 - 1 0 0 R e v . A
Mounting holes are provided on the rear of the
lavatory so it can be secured to the wall if desired.
lavatory so it can be secured to the wall if desired.
5
Assemble vanity as per instructions.
1
2
3
4
• Place the sink on the vanity to check for alignment
and clearance.
and clearance.
• The sink should be centered left to right on the
vanity with the front edge of the sink even with the
front of the vanity.
vanity with the front edge of the sink even with the
front of the vanity.
• Secure sink to furniture as per vanity instructions.
Mount the faucet and drain assembly
(not included) on the sink following the
manufacturer’s instructions. Be certain
to apply a bead of sealing putty on the
underside of the drain (Part “A”) in order
to ensure a watertight seal between the
sink and drain. Remove excess putty
after installing drain on sink.
(not included) on the sink following the
manufacturer’s instructions. Be certain
to apply a bead of sealing putty on the
underside of the drain (Part “A”) in order
to ensure a watertight seal between the
sink and drain. Remove excess putty
after installing drain on sink.
A
Connect supply line to faucet (finger tight) and
carefully bend tubes to engage with the supply
shut-off valves. Tighten connections at faucet
and shut-off valves for secure seal.
carefully bend tubes to engage with the supply
shut-off valves. Tighten connections at faucet
and shut-off valves for secure seal.
Shut-Off Valves
B
C
Connect trap to drain assembly hand tight to
check alignment. It may be necessary to cut
off part of the tailpiece (area “B”) or part of the
horizontal leg of the trap (area “C”). Secure
joints for watertight assembly.
check alignment. It may be necessary to cut
off part of the tailpiece (area “B”) or part of the
horizontal leg of the trap (area “C”). Secure
joints for watertight assembly.
5
6
REPAIR PART NO.
DESCRIPTION
738990-0020A
CHROME OVERFLOW CAP