Moen TS4714 Series 产品宣传页

(DO NOT SCALE)

Rev. 6/08

- Metal construction with various finishes identified by suffix 
- 1/2" IPS connections will accept standard ball nose connection for 3/8” tubing 
- Hydrolock™ quick connect installation
- Includes metal pop-up waste assembly
- For use with S948 valve
- Designed to be installed through 3, 1-1/8” min. dia. holes, 8 -16” on center

- Cross handles
- Maximum handle rotation angle is 90˚ to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close

- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made 

before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)

- Features a laminar flow pattern for dramatic water presentation

- 1224 cartridge design with nonmetallic/nonferrous

and stainless steel materials

- Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1

and all applicable requirements referenced therein

- Certified to ANSI/NSF 61/9
- Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

- Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

- 5 year warranty if used in commercial installations

Models: TS4714 series

NOTE: FOR DECK THICKNESS 1-3/8" - 3", USE SERVICE KIT

#115001.  SERVICE KIT INSTALL THROUGH 1-1/4" DIA. HOLE.