Bradley Smoker S53-308 用户手册

Installation Instructions

8

9/23/04

Bradley Corporation • 215-1559 Rev. A; EN 04-216A

Replace solenoid.

Change mode or range setting using DIPswitch (page 6). 

Clean internal parts or replace solenoid valve.

Clean outlet.

Change mode setting using DIPswitch (page 6). 

Electronics cover must be mounted to allow for drip loops
for the sensor and solenoid cables (pages 4 & 5).

Clean connector.

Reset electronics using reset button (page 6).

Clogged strainer. Clean if necessary.

Clean faucet outlet.

Replace batteries if below 4.2 volts.

Change range setting using DIPswitch (page 6).

Faucet works in reverse.

Faucet turns off too soon.

Faucet stays on longer than
normal.

Faucet stopped working.

Solenoid wiring on DIN connector 
(no beeps).

Faucet operating mode (no beeps) or
faucet range setting.

Dirty solenoid valve (no beeps).

Clogged spout outlet.

Faucet in wrong mode (no beeps).

Mounting of electronics cover (no beeps).

Sensor cable connector.

No clicking sound from solenoid during
hand presence (no beeps).

Solenoid valve strainer.

Check if faucet outlet is clogged 
(no beeps).

Battery voltage (battery operated only).

Incorrect range setting for spout type and
sink used (no beeps).

continued . . .