Axor 38111181 用户手册

3

•

  Save time and frustration: plan the installation of both the faucet and the lavatory carefully.  

•

  For best results, this unit should be installed by a licensed, professional plumber.  

•

  Flush the hot and cold supply lines thoroughly, according to these installation instructions.  

Damage to the valve cartridge caused by debris is not covered by the Hansgrohe warranty.

•

  The cartridge comes in the box with the trim kit.  The rough is equipped with a flush insert that 

will allow the unit to be pressurized while preventing cross flow.

•

  This rough must be completed with a suitable trim kit.

•

  No drain is included with either this rough or the trim kit.  Contact the manufacturer of the 

lavatory for their recommendations regarding suitable drains.

Tool suggested for installation (not included):  socket wrench with 17 mm and 7 mm deep 

sockets

The intended spout should reach far enough into the bowl so that the water hits just ahead of or 

just behind the drain (to minimize splashing).   

The rough should be placed high enough on the wall so that the end of the spout is above the 

flood level of the sink.  Many municipalities require an air gap of at least one inch between the 

end of the spout and the flood level of the sink -- know and follow all applicable local codes 

regarding the air gap.